CMC Triggers115680245
CMC Triggers SLD173GRMR Kragos Glock 17 Gen3 RMR Cut Black DLC Stainless Steel Slide$427.50
Availability: In Stock
Current Stock: Out of stock
The CMC Triggers KRAGOS Glock 19 Gen3 RMR cut slide is a premium billet upgrade for shooters building or customizing a carry pistol, duty gun, or competition rig. If you run a Gen3 Glock 19 and want better ergonomics, corrosion resistance, and the flexibility to mount a modern red dot—without the factory tolerances and wear—this is a direct-fit alternative that accepts your existing barrel and internals. CMC engineered the KRAGOS from 17-4 stainless steel billet and finished it with a hard DLC (diamond-like-carbon) coating, delivering a slide that's both tougher and slicker than the OEM part.
The KRAGOS is built to tighter tolerances than factory Glock slides, which means more consistent barrel lockup shot to shot. The wraparound scalloped serrations provide genuine purchase when you're racking the slide or performing a press check, and the aggressive 45-degree chamfer at the front edge slides into holsters without hanging up on gear. It ships with tritium night sights installed on the standard Glock sight cuts, so you're ready for low-light shooting right away. The RMR-footprint optic cut is pre-machined and ready for any red dot that shares that pattern—Trijicon RMR, Holosun HS407C, HS507C, and HE508T all mount directly and securely.
The DLC coating is the real workhorse here: it's significantly harder than plain stainless and has a slick, low-friction surface that resists corrosion and wear in high-use areas like the ejection port and breach face. If you're building a new pistol on a Polymer80 frame, the KRAGOS slides in without modification. It also pairs seamlessly with CMC triggers and other quality aftermarket parts, making it a solid foundation for a truly custom Glock.
| Brand | CMC Triggers |
| Model | SLD193GRMR KRAGOS |
| Compatibility | Glock 19 Gen3 |
| Material | 17-4 Stainless Steel Billet |
| Heat Treatment | H900 42–44 RC |
| Finish | Black Diamond-Like-Carbon (DLC) |
| Serration Pattern | Wraparound Scalloped |
| Front Edge | 45-Degree Chamfer |
| Sights | Tritium Night Sights (Pre-installed) |
| Optic Cut | RMR Footprint |
| Breach Face | Precision Wire EDM |
Yes. The KRAGOS is designed as a direct drop-in replacement for Gen3 Glock 19 frames. It accepts your existing factory or aftermarket barrel, firing pin, extractor, and other internals—no gunsmithing required.
The pre-cut RMR-footprint mounting slot accommodates optics with the RMR pattern, including Trijicon RMR, Holosun HS407C, HS507C, and HE508T. Other RMR-pattern optics will also fit, but CMC specifically lists these four models as confirmed compatible.
Yes. Tritium night sights are pre-installed on the standard Glock sight cuts, ready to use out of the box.
Yes. The KRAGOS works with Polymer80 Gen3 Glock 19 frames for custom builds, pairing well with quality aftermarket parts and triggers.
SKU: 115749955 • Width: 5.1in • Height: 1.9in • Depth: 10.5in • Weight: 0.88oz
Availability: In Stock
Current Stock: Out of stock
The CMC Triggers KRAGOS Glock 19 Gen3 RMR cut slide is a premium billet upgrade for shooters building or customizing a carry pistol, duty gun, or competition rig. If you run a Gen3 Glock 19 and want better ergonomics, corrosion resistance, and the flexibility to mount a modern red dot—without the factory tolerances and wear—this is a direct-fit alternative that accepts your existing barrel and internals. CMC engineered the KRAGOS from 17-4 stainless steel billet and finished it with a hard DLC (diamond-like-carbon) coating, delivering a slide that's both tougher and slicker than the OEM part.
The KRAGOS is built to tighter tolerances than factory Glock slides, which means more consistent barrel lockup shot to shot. The wraparound scalloped serrations provide genuine purchase when you're racking the slide or performing a press check, and the aggressive 45-degree chamfer at the front edge slides into holsters without hanging up on gear. It ships with tritium night sights installed on the standard Glock sight cuts, so you're ready for low-light shooting right away. The RMR-footprint optic cut is pre-machined and ready for any red dot that shares that pattern—Trijicon RMR, Holosun HS407C, HS507C, and HE508T all mount directly and securely.
The DLC coating is the real workhorse here: it's significantly harder than plain stainless and has a slick, low-friction surface that resists corrosion and wear in high-use areas like the ejection port and breach face. If you're building a new pistol on a Polymer80 frame, the KRAGOS slides in without modification. It also pairs seamlessly with CMC triggers and other quality aftermarket parts, making it a solid foundation for a truly custom Glock.
| Brand | CMC Triggers |
| Model | SLD193GRMR KRAGOS |
| Compatibility | Glock 19 Gen3 |
| Material | 17-4 Stainless Steel Billet |
| Heat Treatment | H900 42–44 RC |
| Finish | Black Diamond-Like-Carbon (DLC) |
| Serration Pattern | Wraparound Scalloped |
| Front Edge | 45-Degree Chamfer |
| Sights | Tritium Night Sights (Pre-installed) |
| Optic Cut | RMR Footprint |
| Breach Face | Precision Wire EDM |
Yes. The KRAGOS is designed as a direct drop-in replacement for Gen3 Glock 19 frames. It accepts your existing factory or aftermarket barrel, firing pin, extractor, and other internals—no gunsmithing required.
The pre-cut RMR-footprint mounting slot accommodates optics with the RMR pattern, including Trijicon RMR, Holosun HS407C, HS507C, and HE508T. Other RMR-pattern optics will also fit, but CMC specifically lists these four models as confirmed compatible.
Yes. Tritium night sights are pre-installed on the standard Glock sight cuts, ready to use out of the box.
Yes. The KRAGOS works with Polymer80 Gen3 Glock 19 frames for custom builds, pairing well with quality aftermarket parts and triggers.
SKU: 115749955 • Width: 5.1in • Height: 1.9in • Depth: 10.5in • Weight: 0.88oz