CMC Triggers115724059
CMC Triggers Goldfinger Drop-In Trigger Group - AR-15, LR-308, Single Stage, 3.5 lb Pull$193.50
Availability: In Stock
A CMC Triggers drop-in trigger group replaces your factory AR-15 or LR-308 with a match-grade single-stage trigger that shoots cleaner and breaks crisper without the guesswork of tuning multiple components. Designed by competition shooter Chip McCormick, this self-contained module installs in minutes and delivers a 3.5 lb pull weight that's already factory-optimized for take-up and over-travel. If you're tired of mushy, heavy factory triggers holding back your accuracy potential, this is the upgrade that separates match-grade performance from the box-store standard.
The engineering here runs deeper than a fancy name. A rigid steel housing keeps all internal components in tight alignment, and precision-ground sear and hammer surfaces create that crisp, clean release shooters chase without sacrificing reliability. Oversized center pins replace the factory pins to reduce friction and eliminate trigger wobble, while threaded sleeves on the hammer and trigger pivots run buttery smooth. Chicago-style screws lock the pins in place so there's no creep or drift even after a high-round-count range session.
You'll choose between a traditional curved trigger shoe or a skeletonized flat design—flat offers a different feel and gives your build a distinctive look if that matters to your aesthetic. Either way, you get a drop-in assembly that requires no fitting, no staking, no gunsmithing. Install it, function-test, and run it. This is the trigger upgrade that turns a good AR into one that genuinely wants to shoot small groups.
| Trigger Type | Single Stage |
| Pull Weight | 3.5 lb |
| Platform Compatibility | AR-15, LR-308 |
| Installation | Drop-In (No Fitting Required) |
| Housing Material | Steel |
| Trigger Shoe Options | Curved or Skeletonized Flat |
Yes. This CMC drop-in is compatible with both AR-15 and LR-308 platforms.
No. This is a true drop-in trigger group. It requires no fitting, adjustment, or staking—just install it in your lower receiver and function-test.
The curved shoe is the traditional AR trigger profile. The flat (skeletonized) shoe offers a different feel and gives your build a distinctive look. Both versions maintain the same 3.5 lb pull weight and performance.
Factory AR triggers are typically heavier and mushier. This CMC single-stage delivers a crisp, clean break at 3.5 lb with factory-tuned take-up and over-travel, plus precision-ground engagement surfaces and smooth pivot operation—significant upgrades for accuracy and shooting quality.
SKU: 115768076 • Width: 3.5in • Height: 1in • Depth: 3.5in • Weight: 0.25oz
Availability: In Stock
A CMC Triggers drop-in trigger group replaces your factory AR-15 or LR-308 with a match-grade single-stage trigger that shoots cleaner and breaks crisper without the guesswork of tuning multiple components. Designed by competition shooter Chip McCormick, this self-contained module installs in minutes and delivers a 3.5 lb pull weight that's already factory-optimized for take-up and over-travel. If you're tired of mushy, heavy factory triggers holding back your accuracy potential, this is the upgrade that separates match-grade performance from the box-store standard.
The engineering here runs deeper than a fancy name. A rigid steel housing keeps all internal components in tight alignment, and precision-ground sear and hammer surfaces create that crisp, clean release shooters chase without sacrificing reliability. Oversized center pins replace the factory pins to reduce friction and eliminate trigger wobble, while threaded sleeves on the hammer and trigger pivots run buttery smooth. Chicago-style screws lock the pins in place so there's no creep or drift even after a high-round-count range session.
You'll choose between a traditional curved trigger shoe or a skeletonized flat design—flat offers a different feel and gives your build a distinctive look if that matters to your aesthetic. Either way, you get a drop-in assembly that requires no fitting, no staking, no gunsmithing. Install it, function-test, and run it. This is the trigger upgrade that turns a good AR into one that genuinely wants to shoot small groups.
| Trigger Type | Single Stage |
| Pull Weight | 3.5 lb |
| Platform Compatibility | AR-15, LR-308 |
| Installation | Drop-In (No Fitting Required) |
| Housing Material | Steel |
| Trigger Shoe Options | Curved or Skeletonized Flat |
Yes. This CMC drop-in is compatible with both AR-15 and LR-308 platforms.
No. This is a true drop-in trigger group. It requires no fitting, adjustment, or staking—just install it in your lower receiver and function-test.
The curved shoe is the traditional AR trigger profile. The flat (skeletonized) shoe offers a different feel and gives your build a distinctive look. Both versions maintain the same 3.5 lb pull weight and performance.
Factory AR triggers are typically heavier and mushier. This CMC single-stage delivers a crisp, clean break at 3.5 lb with factory-tuned take-up and over-travel, plus precision-ground engagement surfaces and smooth pivot operation—significant upgrades for accuracy and shooting quality.
SKU: 115768076 • Width: 3.5in • Height: 1in • Depth: 3.5in • Weight: 0.25oz