$64.63
Availability: In Stock
The Burris Xtreme Tactical 1-Piece Base for Remington 700 Long Action rifles delivers the solid foundation that precision shooters need for repeatable, reliable scope mounting. Built from a single piece of milled steel, this base combines the structural integrity of one-piece construction with the versatility to work with any Weaver or Picatinny ring system—whether you're building a long-range hunting rifle, a precision target gun, or a tactical platform. The matte finish resists glare and blends into most modern stocks.
A one-piece base eliminates the flex and potential point-of-impact shifts that can occur with two-piece designs, especially important when you're dialing in for distance or running heavier recoiling calibers. This base arrives with 0 MOA cant, meaning the rail sits perfectly parallel to your barrel centerline—the right choice if your scope already has sufficient elevation adjustment or if you prefer to dial your rifle in without base-induced elevation offset.
If your setup demands an upward angle for extended-range hunting or competition, Burris offers this base in up to 25 MOA configurations separately. Installation is straightforward on any Remington 700 Long Action, and compatibility with standard Weaver and Picatinny rings means you're not locked into a single ring brand or height.
| Brand | Burris |
| Product Line | Xtreme Tactical |
| Type | 1-Piece Rifle Base |
| Finish | Matte |
| Compatibility | Remington 700 Long Action |
| Rail System | Weaver and Picatinny |
| MOA Cant | 0 MOA |
| Construction | Milled steel |
Yes—this base is machined specifically for Remington 700 Long Action receivers. If you have a short action R700, you'll need a different base model.
The base accepts any Weaver or Picatinny compatible rings, giving you flexibility in ring brand, height, and style. Make sure your rings are rated for Weaver or Picatinny mounting.
0 MOA means the base sits flat and parallel to your barrel. This is ideal for standard hunting and target setups where your scope's internal elevation adjustment handles all bullet drop compensation. If you're planning extreme long-range hunting and want a built-in upward angle to reduce scope dial turns, Burris offers this base in up to 25 MOA cant configurations—order the appropriate MOA version for your use case.
One-piece bases are milled from solid steel and eliminate the potential flex and point-of-impact shift that can occur at the seam between two separate base pieces. For precision rifle work, this rigidity is a significant advantage in repeatability and accuracy.
SKU: 114465549 • Width: 3in • Height: 1in • Depth: 10in • Weight: 0.44oz
Availability: In Stock
The Burris Xtreme Tactical 1-Piece Base for Remington 700 Long Action rifles delivers the solid foundation that precision shooters need for repeatable, reliable scope mounting. Built from a single piece of milled steel, this base combines the structural integrity of one-piece construction with the versatility to work with any Weaver or Picatinny ring system—whether you're building a long-range hunting rifle, a precision target gun, or a tactical platform. The matte finish resists glare and blends into most modern stocks.
A one-piece base eliminates the flex and potential point-of-impact shifts that can occur with two-piece designs, especially important when you're dialing in for distance or running heavier recoiling calibers. This base arrives with 0 MOA cant, meaning the rail sits perfectly parallel to your barrel centerline—the right choice if your scope already has sufficient elevation adjustment or if you prefer to dial your rifle in without base-induced elevation offset.
If your setup demands an upward angle for extended-range hunting or competition, Burris offers this base in up to 25 MOA configurations separately. Installation is straightforward on any Remington 700 Long Action, and compatibility with standard Weaver and Picatinny rings means you're not locked into a single ring brand or height.
| Brand | Burris |
| Product Line | Xtreme Tactical |
| Type | 1-Piece Rifle Base |
| Finish | Matte |
| Compatibility | Remington 700 Long Action |
| Rail System | Weaver and Picatinny |
| MOA Cant | 0 MOA |
| Construction | Milled steel |
Yes—this base is machined specifically for Remington 700 Long Action receivers. If you have a short action R700, you'll need a different base model.
The base accepts any Weaver or Picatinny compatible rings, giving you flexibility in ring brand, height, and style. Make sure your rings are rated for Weaver or Picatinny mounting.
0 MOA means the base sits flat and parallel to your barrel. This is ideal for standard hunting and target setups where your scope's internal elevation adjustment handles all bullet drop compensation. If you're planning extreme long-range hunting and want a built-in upward angle to reduce scope dial turns, Burris offers this base in up to 25 MOA cant configurations—order the appropriate MOA version for your use case.
One-piece bases are milled from solid steel and eliminate the potential flex and point-of-impact shift that can occur at the seam between two separate base pieces. For precision rifle work, this rigidity is a significant advantage in repeatability and accuracy.
SKU: 114465549 • Width: 3in • Height: 1in • Depth: 10in • Weight: 0.44oz