Brownells194200249
Brownells Complete Slide Assembly With Threaded Barrel For Glock 19$243.24
Availability: In Stock
Current Stock: Out of stock
Building or upgrading a Glock 19? The Brownells Complete Slide Assembly With Barrel for Glock 19 gets you most of the way there in one shot. This is a fully assembled "top half" for Gen3 Glock 19 pistols and compatible aftermarket frames—barrel, sights, internal parts, and all installed and ready to marry to a frame. No need to source and fit a dozen small components; it's the kind of time-saver that makes sense whether you're doing a fresh custom build or modernizing a factory pistol.
The slide itself is machined from 416 stainless steel billet and finished in black Nitride, a wear-resistant coating that stands up to hard use. You get a choice of three configurations: a standard solid-top slide with a match-grade barrel, a solid-top with a half-inch 28 TPI threaded barrel (suppressor-ready), or a distinctive windowed top paired with a ported barrel. That ported barrel vents through ports in the slide to help tame muzzle rise and keep your sights tracking faster on follow-up shots—all without adding a bulky comp to the muzzle, so it still fits standard Glock 19 holsters. The match-quality barrel is 416R stainless steel, machined to precise tolerances.
A pre-cut slot accepts Trijicon RMR-pattern red dot sights (a cover plate is included if you're not mounting an optic yet), and the assembly ships with standard-height front and rear iron sights that work as primaries, backups, or cowitnesses. Wide, shallow cocking serrations run along both the rear and front of the slide for confident manipulation from any grip angle or position.
Channel liner installation is required; this is a press-fit and requires a tool to install properly. Otherwise, this Brownells slide assembly is a no-fuss path to a modern, capable Glock 19 platform.
| Slide Material | 416 Stainless Steel (Billet) |
| Slide Finish | Black Nitride |
| Barrel Material | 416R Stainless Steel |
| Barrel Options | Standard, Threaded (1/2"-28 TPI), or Ported |
| Compatibility | Gen3 Glock 19, Compatible Aftermarket Frames |
| Optic Mount | Trijicon RMR Footprint |
| Sights Included | Standard-Height Front and Rear |
| Accessories Included | Optic Cover Plate, Recoil Spring Assembly |
The Brownells Complete Slide Assembly is designed for Gen3 Glock 19 pistols and compatible aftermarket frames built to Glock factory G19 specifications.
The assembly comes fully installed with the barrel, front and rear sights, small internal parts, a Trijicon RMR-pattern optic cover plate, and a recoil spring assembly. You'll need a compatible frame and a channel liner (sold separately) to complete the pistol.
Yes. Choose the threaded-barrel option (1/2"-28 TPI) to mount a suppressor, or the ported-barrel configuration with the windowed slide to reduce muzzle rise without adding a muzzle device. Both styles will still fit standard Glock 19 holsters.
Yes. The slide comes with a pre-cut, low-profile mounting slot machined for Trijicon RMR-pattern reflex sights. A cover plate is included if you aren't mounting an optic immediately.
SKU: 194200236 • Weight: 1oz
Availability: In Stock
Current Stock: Out of stock
Building or upgrading a Glock 19? The Brownells Complete Slide Assembly With Barrel for Glock 19 gets you most of the way there in one shot. This is a fully assembled "top half" for Gen3 Glock 19 pistols and compatible aftermarket frames—barrel, sights, internal parts, and all installed and ready to marry to a frame. No need to source and fit a dozen small components; it's the kind of time-saver that makes sense whether you're doing a fresh custom build or modernizing a factory pistol.
The slide itself is machined from 416 stainless steel billet and finished in black Nitride, a wear-resistant coating that stands up to hard use. You get a choice of three configurations: a standard solid-top slide with a match-grade barrel, a solid-top with a half-inch 28 TPI threaded barrel (suppressor-ready), or a distinctive windowed top paired with a ported barrel. That ported barrel vents through ports in the slide to help tame muzzle rise and keep your sights tracking faster on follow-up shots—all without adding a bulky comp to the muzzle, so it still fits standard Glock 19 holsters. The match-quality barrel is 416R stainless steel, machined to precise tolerances.
A pre-cut slot accepts Trijicon RMR-pattern red dot sights (a cover plate is included if you're not mounting an optic yet), and the assembly ships with standard-height front and rear iron sights that work as primaries, backups, or cowitnesses. Wide, shallow cocking serrations run along both the rear and front of the slide for confident manipulation from any grip angle or position.
Channel liner installation is required; this is a press-fit and requires a tool to install properly. Otherwise, this Brownells slide assembly is a no-fuss path to a modern, capable Glock 19 platform.
| Slide Material | 416 Stainless Steel (Billet) |
| Slide Finish | Black Nitride |
| Barrel Material | 416R Stainless Steel |
| Barrel Options | Standard, Threaded (1/2"-28 TPI), or Ported |
| Compatibility | Gen3 Glock 19, Compatible Aftermarket Frames |
| Optic Mount | Trijicon RMR Footprint |
| Sights Included | Standard-Height Front and Rear |
| Accessories Included | Optic Cover Plate, Recoil Spring Assembly |
The Brownells Complete Slide Assembly is designed for Gen3 Glock 19 pistols and compatible aftermarket frames built to Glock factory G19 specifications.
The assembly comes fully installed with the barrel, front and rear sights, small internal parts, a Trijicon RMR-pattern optic cover plate, and a recoil spring assembly. You'll need a compatible frame and a channel liner (sold separately) to complete the pistol.
Yes. Choose the threaded-barrel option (1/2"-28 TPI) to mount a suppressor, or the ported-barrel configuration with the windowed slide to reduce muzzle rise without adding a muzzle device. Both styles will still fit standard Glock 19 holsters.
Yes. The slide comes with a pre-cut, low-profile mounting slot machined for Trijicon RMR-pattern reflex sights. A cover plate is included if you aren't mounting an optic immediately.
SKU: 194200236 • Weight: 1oz