Brownells194199634
Brownells Ar-15/M16A1 Retro Carbine 5.56Mm 11.5'' 1-7 Bbl Assembly$235.99
Availability: In Stock
Current Stock: Out of stock
The Brownells AR-15/M16A1 Retro Carbine 5.56mm barrel assembly brings authentic A1-profile aesthetics and solid performance to your retro rifle build. This complete 12.7-inch carbine-length barrel comes ready to install, with a 1-7 inch twist rate suited to a wide range of 5.56 NATO ammunition. Chrome-lined for durability and corrosion resistance, it's finished in black phosphate and machined from 4150 chrome moly steel—the same material spec you'll find in quality AR builds across the board.
What makes this a true plug-and-play assembly is the included front-sight base, pre-installed handguard cap, barrel nut, delta ring, and all the small parts needed to complete the upper receiver section. The front-sight base features the correct .625-inch diameter without F-marked cuts, maintaining the vintage A1 look while keeping your options open. Muzzle threading is standard ½"-28 for suppressors or muzzle devices, and the standard barrel extension ensures reliable feeding and chambering.
Whether you're building a clone rifle that honors the original M16A1, or simply prefer the ergonomics and aesthetics of a retro-profile carbine, this assembly eliminates guesswork and sourcing headaches. All the parts talk to each other out of the box, which means less time hunting down compatibility issues and more time at the range.
| Caliber | 5.56x45mm NATO |
| Barrel Length | 12.7 inches |
| Twist Rate | 1-7 inch |
| Profile | A1 Carbine |
| Material | 4150 Chrome Moly Steel, Chrome-Lined |
| Finish | Black Phosphate |
| Muzzle Thread | ½"-28 |
| Front-Sight Base Diameter | .625 inch |
| Barrel Extension | Standard |
A 1-7 inch twist is versatile and will stabilize the vast majority of 5.56 NATO loads you're likely to shoot, from lighter 55-grain rounds to heavier match and hunting ammunition. It's the original M16A1 twist rate and remains a reliable all-around choice for both target and field use.
This is a complete barrel assembly with the front-sight base, barrel nut, delta ring, handguard cap, and all associated springs and fasteners installed. You'll still need a compatible upper receiver to mate it to, but the barrel itself arrives ready to go—no additional gunsmithing required for assembly.
Yes. The ½"-28 muzzle threads accept standard suppressors and muzzle devices. The chrome-lined 5.56 chamber will fire any 5.56 NATO or .223 Remington ammunition safely. The retro profile is aesthetic; the chamber and threading are fully modern-compatible.
The front-sight base is .625 inch in diameter with no F-marked cuts, delivering the authentic A1 appearance. It comes complete with the sight post, detent spring, and sling swivel installed and ready.
SKU: 194199665 • Weight: 1oz
Availability: In Stock
Current Stock: Out of stock
The Brownells AR-15/M16A1 Retro Carbine 5.56mm barrel assembly brings authentic A1-profile aesthetics and solid performance to your retro rifle build. This complete 12.7-inch carbine-length barrel comes ready to install, with a 1-7 inch twist rate suited to a wide range of 5.56 NATO ammunition. Chrome-lined for durability and corrosion resistance, it's finished in black phosphate and machined from 4150 chrome moly steel—the same material spec you'll find in quality AR builds across the board.
What makes this a true plug-and-play assembly is the included front-sight base, pre-installed handguard cap, barrel nut, delta ring, and all the small parts needed to complete the upper receiver section. The front-sight base features the correct .625-inch diameter without F-marked cuts, maintaining the vintage A1 look while keeping your options open. Muzzle threading is standard ½"-28 for suppressors or muzzle devices, and the standard barrel extension ensures reliable feeding and chambering.
Whether you're building a clone rifle that honors the original M16A1, or simply prefer the ergonomics and aesthetics of a retro-profile carbine, this assembly eliminates guesswork and sourcing headaches. All the parts talk to each other out of the box, which means less time hunting down compatibility issues and more time at the range.
| Caliber | 5.56x45mm NATO |
| Barrel Length | 12.7 inches |
| Twist Rate | 1-7 inch |
| Profile | A1 Carbine |
| Material | 4150 Chrome Moly Steel, Chrome-Lined |
| Finish | Black Phosphate |
| Muzzle Thread | ½"-28 |
| Front-Sight Base Diameter | .625 inch |
| Barrel Extension | Standard |
A 1-7 inch twist is versatile and will stabilize the vast majority of 5.56 NATO loads you're likely to shoot, from lighter 55-grain rounds to heavier match and hunting ammunition. It's the original M16A1 twist rate and remains a reliable all-around choice for both target and field use.
This is a complete barrel assembly with the front-sight base, barrel nut, delta ring, handguard cap, and all associated springs and fasteners installed. You'll still need a compatible upper receiver to mate it to, but the barrel itself arrives ready to go—no additional gunsmithing required for assembly.
Yes. The ½"-28 muzzle threads accept standard suppressors and muzzle devices. The chrome-lined 5.56 chamber will fire any 5.56 NATO or .223 Remington ammunition safely. The retro profile is aesthetic; the chamber and threading are fully modern-compatible.
The front-sight base is .625 inch in diameter with no F-marked cuts, delivering the authentic A1 appearance. It comes complete with the sight post, detent spring, and sling swivel installed and ready.
SKU: 194199665 • Weight: 1oz