Availability: In Stock
The Breek Arms Scorch 3-prong flash hider is a quick-detach muzzle device built for AR-platform rifles chambered in .223 Remington or 5.56mm NATO. If you're running the Breek-LOK 3QD suppressor attachment system, this hider pairs directly with that platform—no adapter needed. The three-prong design does the heavy lifting on muzzle flash reduction by breaking up and redirecting hot gases away from your line of sight, which matters most in low-light conditions where flash can compromise your sight picture and night vision. The prongs also feature staggered slot lengths that quiet the typical "ping" you hear from traditional tine-style flash hiders, giving you a more refined shooting experience without sacrificing flash control.
Built from 4140 hardened steel with black nitride finish, the Scorch is engineered to handle sustained use and harsh environments. At 2.25 inches long and just 2.1 ounces, it keeps your muzzle end light and adds minimal length to your barrel. The internal thread geometry supports passive suppression characteristics even when running unsuppressed, so you get some of that benefit whether or not you're using a can. Threaded 1/2×28 for common .223/5.56 barrels, it's designed and manufactured in the USA.
This is purpose-built for hunters, tactical shooters, and range regulars who want a clean quick-detach platform without compromise. If you've already invested in the Breek-LOK ecosystem, the Scorch integrates seamlessly; if you're building around it, you're getting a flash hider that does its job with less fuss than the competition.
| Brand | Breek Arms |
| Model | BRK4315 Scorch |
| Caliber/Cartridge | .223 Remington / 5.56mm NATO |
| Thread Pitch | 1/2×28 |
| Material | 4140 Hardened Steel, Nitride Finish |
| Overall Length | 2.25 inches |
| Weight | 2.1 oz |
| QD System | Breek-LOK 3QD Compatible |
| Included Accessories | Peel Washer |
The Scorch is designed to work with suppressors that mount via the Breek-LOK 3QD quick-detach system. If your suppressor uses a different QD platform, it won't be compatible. The hider itself can run without a suppressor and still provide flash reduction and gas redirection on its own.
The Scorch is threaded 1/2×28, which is the standard for most .223 Remington and 5.56mm NATO barrels. Check your barrel's thread pitch before purchasing to ensure proper fit.
The Scorch comes with a peel washer. You'll need an armorer's wrench or a proper barrel vice to install it securely onto your barrel.
The varying slot lengths in the three prongs are designed to minimize the distinctive metallic ping associated with traditional tine-style flash hiders. Results vary depending on ammunition and shooting conditions, but the design purpose is to suppress that noise signature compared to standard hider geometries.
SKU: 197561675 • Width: 2.9in • Height: 1.1in • Depth: 4.8in • Weight: 0.16oz
Availability: In Stock
The Breek Arms Scorch 3-prong flash hider is a quick-detach muzzle device built for AR-platform rifles chambered in .223 Remington or 5.56mm NATO. If you're running the Breek-LOK 3QD suppressor attachment system, this hider pairs directly with that platform—no adapter needed. The three-prong design does the heavy lifting on muzzle flash reduction by breaking up and redirecting hot gases away from your line of sight, which matters most in low-light conditions where flash can compromise your sight picture and night vision. The prongs also feature staggered slot lengths that quiet the typical "ping" you hear from traditional tine-style flash hiders, giving you a more refined shooting experience without sacrificing flash control.
Built from 4140 hardened steel with black nitride finish, the Scorch is engineered to handle sustained use and harsh environments. At 2.25 inches long and just 2.1 ounces, it keeps your muzzle end light and adds minimal length to your barrel. The internal thread geometry supports passive suppression characteristics even when running unsuppressed, so you get some of that benefit whether or not you're using a can. Threaded 1/2×28 for common .223/5.56 barrels, it's designed and manufactured in the USA.
This is purpose-built for hunters, tactical shooters, and range regulars who want a clean quick-detach platform without compromise. If you've already invested in the Breek-LOK ecosystem, the Scorch integrates seamlessly; if you're building around it, you're getting a flash hider that does its job with less fuss than the competition.
| Brand | Breek Arms |
| Model | BRK4315 Scorch |
| Caliber/Cartridge | .223 Remington / 5.56mm NATO |
| Thread Pitch | 1/2×28 |
| Material | 4140 Hardened Steel, Nitride Finish |
| Overall Length | 2.25 inches |
| Weight | 2.1 oz |
| QD System | Breek-LOK 3QD Compatible |
| Included Accessories | Peel Washer |
The Scorch is designed to work with suppressors that mount via the Breek-LOK 3QD quick-detach system. If your suppressor uses a different QD platform, it won't be compatible. The hider itself can run without a suppressor and still provide flash reduction and gas redirection on its own.
The Scorch is threaded 1/2×28, which is the standard for most .223 Remington and 5.56mm NATO barrels. Check your barrel's thread pitch before purchasing to ensure proper fit.
The Scorch comes with a peel washer. You'll need an armorer's wrench or a proper barrel vice to install it securely onto your barrel.
The varying slot lengths in the three prongs are designed to minimize the distinctive metallic ping associated with traditional tine-style flash hiders. Results vary depending on ammunition and shooting conditions, but the design purpose is to suppress that noise signature compared to standard hider geometries.
SKU: 197561675 • Width: 2.9in • Height: 1.1in • Depth: 4.8in • Weight: 0.16oz