Bravo Company194196702
Bravo Company Bcmgunfighter Compensator Mod 7- 5.56 (2'' Open Tine)$94.95
Availability: In Stock
The Bravo Company BCMGunfighter Compensator Mod 3 for 5.56mm is a purpose-built muzzle device engineered for AR-15 shooters who need serious recoil control without the flash and noise penalties of a traditional brake. Built on tactical design principles rather than competition gaming, this compensator reduces muzzle rise, tames recoil impulse, and minimizes the visible signature your rifle throws downrange—all critical for hunting, precision shooting, and tactical applications where shooter control and target reacquisition matter.
The Mod 3 uses strategically tuned porting to direct combustion gases in ways that work against muzzle climb and lateral movement simultaneously. Unlike compensators that sacrifice hearing and neighbor relations for raw recoil reduction, Bravo Company's dual-action design keeps noise levels more manageable while still delivering measurable mitigation. The entire unit wears a nitride finish that stands up to the brutal environment of hot, fast-moving gases, powder particles, and metal debris escaping the muzzle—meaning it stays accurate and looking good through thousands of rounds.
Installation is straightforward for anyone comfortable working on an AR platform: the compensator threads onto 1/2x28 muzzle cuts common to 5.56 AR-15s and ships with a crush washer for proper timing. A predrilled hole at the base lets you pin it permanently if desired. The Mod 3 runs longer than its Mod 2 predecessor, which makes it especially useful for turning a 14.5-inch barrel into a legal 16-inch-plus setup in compliance with federal regulations.
| Brand | Bravo Company |
| Model | BCMGunfighter Compensator Mod 3 |
| Caliber | 5.56mm (.223) |
| Platform | AR-15 (5.56 NATO) |
| Thread Size | 1/2x28 |
| Material | Steel, Nitride finished |
| Included | Crush Washer |
| Installation | Recommended by qualified armorer |
The Mod 3 is a longer version of the Mod 2, making it better suited for extending shorter barrels to legal OAL (overall length) while maintaining the same tuned compensation philosophy.
Yes, if your barrel has a 1/2x28 muzzle thread. This is the standard thread pitch for 5.56mm AR-15s. If you're unsure, verify your barrel's thread size before ordering.
It ships with a crush washer. For proper installation, you'll need a qualified armorer or experienced builder to thread it on, time it correctly, and optionally pin the predrilled hole.
The BCMGunfighter Mod 3's dual-action design produces less noise than a standard compensator, though all muzzle devices add some noise compared to shooting unsuppressed without one. It prioritizes recoil control and flash reduction alongside sound management.
SKU: 194196693 • Weight: 0.5oz
Availability: In Stock
The Bravo Company BCMGunfighter Compensator Mod 3 for 5.56mm is a purpose-built muzzle device engineered for AR-15 shooters who need serious recoil control without the flash and noise penalties of a traditional brake. Built on tactical design principles rather than competition gaming, this compensator reduces muzzle rise, tames recoil impulse, and minimizes the visible signature your rifle throws downrange—all critical for hunting, precision shooting, and tactical applications where shooter control and target reacquisition matter.
The Mod 3 uses strategically tuned porting to direct combustion gases in ways that work against muzzle climb and lateral movement simultaneously. Unlike compensators that sacrifice hearing and neighbor relations for raw recoil reduction, Bravo Company's dual-action design keeps noise levels more manageable while still delivering measurable mitigation. The entire unit wears a nitride finish that stands up to the brutal environment of hot, fast-moving gases, powder particles, and metal debris escaping the muzzle—meaning it stays accurate and looking good through thousands of rounds.
Installation is straightforward for anyone comfortable working on an AR platform: the compensator threads onto 1/2x28 muzzle cuts common to 5.56 AR-15s and ships with a crush washer for proper timing. A predrilled hole at the base lets you pin it permanently if desired. The Mod 3 runs longer than its Mod 2 predecessor, which makes it especially useful for turning a 14.5-inch barrel into a legal 16-inch-plus setup in compliance with federal regulations.
| Brand | Bravo Company |
| Model | BCMGunfighter Compensator Mod 3 |
| Caliber | 5.56mm (.223) |
| Platform | AR-15 (5.56 NATO) |
| Thread Size | 1/2x28 |
| Material | Steel, Nitride finished |
| Included | Crush Washer |
| Installation | Recommended by qualified armorer |
The Mod 3 is a longer version of the Mod 2, making it better suited for extending shorter barrels to legal OAL (overall length) while maintaining the same tuned compensation philosophy.
Yes, if your barrel has a 1/2x28 muzzle thread. This is the standard thread pitch for 5.56mm AR-15s. If you're unsure, verify your barrel's thread size before ordering.
It ships with a crush washer. For proper installation, you'll need a qualified armorer or experienced builder to thread it on, time it correctly, and optionally pin the predrilled hole.
The BCMGunfighter Mod 3's dual-action design produces less noise than a standard compensator, though all muzzle devices add some noise compared to shooting unsuppressed without one. It prioritizes recoil control and flash reduction alongside sound management.
SKU: 194196693 • Weight: 0.5oz