Bog-Pod115816930
BOG 3" M-LOK to Arca Swiss Tripod Adapter Plate$13.61
Loading...
Loading...
Loading...
Availability: In Stock
The BOG-Pod 12" M-LOK Arca-Swiss tripod plate bridges your precision rifle setup to a rock-solid rest. If you're running an MSR or chassis rifle with an M-LOK forend and want to lock into an Arca-Swiss tripod—whether that's a BOG DeathGrip Infinite, DeathGrip Sherpa, or any other Arca-Swiss compatible head—this rail gives you a direct, repeatable connection without permanent modification to your gun. It's the accessory that turns your tripod system into a stable, adjustable platform for long-range shooting, load development, or competitive precision rifle work.
At just 3.5 ounces, weight savings matter when you're already hauling gear to the range or field. The plate is machined from aluminum and engineered to handle the rigors of repeated mounting cycles without flex or slop. Four connection points at the M-LOK interface distribute load evenly and maximize stability—crucial when you're trying to dial in a load or glass distant targets. The Arca-Swiss profile on the opposite end is universal, so you're not locked into one tripod brand; upgrade or swap heads without losing compatibility.
This is a straightforward piece of kit: no batteries, no complications, just solid aluminum and the right geometry to make your rifle shoot groups like it's bolted to the bench. Works with standard M-LOK slots on modern chassis and forends, and plays nicely with any M-LOK adapter if your setup needs one.
| Length | 12 inches |
| Material | Aluminum |
| Weight | 3.5 oz |
| Interface (Rifle Side) | M-LOK (4 connection points) |
| Interface (Tripod Side) | Arca-Swiss |
| Model | 1196120 |
Yes. The BOG-Pod plate is universal Arca-Swiss compatible, so it works with BOG tripod heads (DeathGrip Infinite, DeathGrip Sherpa, Infinite) and any other tripod or shooting rest that uses the Arca-Swiss mounting standard.
Your rifle or chassis needs a standard M-LOK interface on the forend. If your setup uses M-LOK slots, this plate connects directly. If not, you may need an M-LOK adapter that fits your particular forend profile, though adapters are widely available.
The plate weighs 3.5 ounces, so it's a minimal addition to your rifle's total system weight—important if you're concerned about pack load or want to keep your rig as light as possible for field use.
The BOG-Pod M-LOK Arca-Swiss plate is the rail itself. You'll need an Arca-Swiss tripod head or shooting rest to complete the mounting system; the plate is the adapter that connects your M-LOK forend to that tripod.
SKU: 121687832 • Width: 3.5in • Height: 0.6in • Depth: 14.5in • Weight: 0.34oz
Availability: In Stock
The BOG-Pod 12" M-LOK Arca-Swiss tripod plate bridges your precision rifle setup to a rock-solid rest. If you're running an MSR or chassis rifle with an M-LOK forend and want to lock into an Arca-Swiss tripod—whether that's a BOG DeathGrip Infinite, DeathGrip Sherpa, or any other Arca-Swiss compatible head—this rail gives you a direct, repeatable connection without permanent modification to your gun. It's the accessory that turns your tripod system into a stable, adjustable platform for long-range shooting, load development, or competitive precision rifle work.
At just 3.5 ounces, weight savings matter when you're already hauling gear to the range or field. The plate is machined from aluminum and engineered to handle the rigors of repeated mounting cycles without flex or slop. Four connection points at the M-LOK interface distribute load evenly and maximize stability—crucial when you're trying to dial in a load or glass distant targets. The Arca-Swiss profile on the opposite end is universal, so you're not locked into one tripod brand; upgrade or swap heads without losing compatibility.
This is a straightforward piece of kit: no batteries, no complications, just solid aluminum and the right geometry to make your rifle shoot groups like it's bolted to the bench. Works with standard M-LOK slots on modern chassis and forends, and plays nicely with any M-LOK adapter if your setup needs one.
| Length | 12 inches |
| Material | Aluminum |
| Weight | 3.5 oz |
| Interface (Rifle Side) | M-LOK (4 connection points) |
| Interface (Tripod Side) | Arca-Swiss |
| Model | 1196120 |
Yes. The BOG-Pod plate is universal Arca-Swiss compatible, so it works with BOG tripod heads (DeathGrip Infinite, DeathGrip Sherpa, Infinite) and any other tripod or shooting rest that uses the Arca-Swiss mounting standard.
Your rifle or chassis needs a standard M-LOK interface on the forend. If your setup uses M-LOK slots, this plate connects directly. If not, you may need an M-LOK adapter that fits your particular forend profile, though adapters are widely available.
The plate weighs 3.5 ounces, so it's a minimal addition to your rifle's total system weight—important if you're concerned about pack load or want to keep your rig as light as possible for field use.
The BOG-Pod M-LOK Arca-Swiss plate is the rail itself. You'll need an Arca-Swiss tripod head or shooting rest to complete the mounting system; the plate is the adapter that connects your M-LOK forend to that tripod.
SKU: 121687832 • Width: 3.5in • Height: 0.6in • Depth: 14.5in • Weight: 0.34oz