$54.24
Availability: In Stock
Berger 243 Cal 6mm 105 Grain HPBT Target Bullets deliver match-grade precision for reloaders chasing sub-minute-of-angle groups at the range or in competition. These boat tail target rounds are engineered for the serious handloader—whether you're tuning loads for benchrest matches, pushing shots past mid-range, or stretching accuracy out to 600 yards and beyond. The tangent ogive design makes them forgiving to load and tune, helping you dial in consistent velocity and minimal jump-to-lands variation.
What sets these bullets apart is construction quality that shows. Berger uses J4 Precision jackets with Total Indicated Runout (TIR) held to +/- .0001 inch and extremely tight manufacturing tolerances throughout. That precision in the jacket translates to flight stability, repeatable ballistics, and the kind of consistency competitive shooters demand when tenths of a point decide match outcomes.
This box contains 100 rounds, sized for the .243 Winchester and similar 6mm cartridges. If you're reloading for accuracy rather than volume, and you're willing to invest in components that match your attention to detail, Berger's target-grade bullets reward that commitment with groups that prove it.
| Caliber | .243 / 6mm |
| Weight | 105 Grains |
| Bullet Type | Hollow Point Boat Tail (HPBT) Target |
| Ogive Design | Tangent Ogive |
| Jacket Construction | J4 Precision Jacket |
| TIR Tolerance | +/- .0001 inch |
| Count per Box | 100 |
These are .243 / 6mm bullets, so they're sized for rifles chambered in .243 Winchester and other 6mm cartridges. If you're reloading for a different caliber, you'll need to verify the correct bullet diameter and weight for your specific cartridge.
These are target-grade bullets optimized for accuracy and consistency at the range and in benchrest competition. For hunting applications, consult your reloading manual and bullet manufacturer recommendations to ensure the bullet weight and construction suit your intended game and hunting distance.
Total Indicated Runout (TIR) measures how straight and concentric the jacket is relative to the bullet axis. A TIR of +/- .0001 inch is extremely tight and means minimal runout—this consistency reduces bullet run-out issues in your reloads and helps deliver more uniform flight and better group potential.
The tangent ogive profile is forgiving when seating bullets, making it less sensitive to slight variations in seating depth. This allows easier load development and tuning without drastically affecting jump, which helps new and experienced handloaders achieve consistent results faster.
SKU: 115723838 • Width: 3.3in • Height: 1.5in • Depth: 3.4in • Weight: 1.6oz
Availability: In Stock
Berger 243 Cal 6mm 105 Grain HPBT Target Bullets deliver match-grade precision for reloaders chasing sub-minute-of-angle groups at the range or in competition. These boat tail target rounds are engineered for the serious handloader—whether you're tuning loads for benchrest matches, pushing shots past mid-range, or stretching accuracy out to 600 yards and beyond. The tangent ogive design makes them forgiving to load and tune, helping you dial in consistent velocity and minimal jump-to-lands variation.
What sets these bullets apart is construction quality that shows. Berger uses J4 Precision jackets with Total Indicated Runout (TIR) held to +/- .0001 inch and extremely tight manufacturing tolerances throughout. That precision in the jacket translates to flight stability, repeatable ballistics, and the kind of consistency competitive shooters demand when tenths of a point decide match outcomes.
This box contains 100 rounds, sized for the .243 Winchester and similar 6mm cartridges. If you're reloading for accuracy rather than volume, and you're willing to invest in components that match your attention to detail, Berger's target-grade bullets reward that commitment with groups that prove it.
| Caliber | .243 / 6mm |
| Weight | 105 Grains |
| Bullet Type | Hollow Point Boat Tail (HPBT) Target |
| Ogive Design | Tangent Ogive |
| Jacket Construction | J4 Precision Jacket |
| TIR Tolerance | +/- .0001 inch |
| Count per Box | 100 |
These are .243 / 6mm bullets, so they're sized for rifles chambered in .243 Winchester and other 6mm cartridges. If you're reloading for a different caliber, you'll need to verify the correct bullet diameter and weight for your specific cartridge.
These are target-grade bullets optimized for accuracy and consistency at the range and in benchrest competition. For hunting applications, consult your reloading manual and bullet manufacturer recommendations to ensure the bullet weight and construction suit your intended game and hunting distance.
Total Indicated Runout (TIR) measures how straight and concentric the jacket is relative to the bullet axis. A TIR of +/- .0001 inch is extremely tight and means minimal runout—this consistency reduces bullet run-out issues in your reloads and helps deliver more uniform flight and better group potential.
The tangent ogive profile is forgiving when seating bullets, making it less sensitive to slight variations in seating depth. This allows easier load development and tuning without drastically affecting jump, which helps new and experienced handloaders achieve consistent results faster.
SKU: 115723838 • Width: 3.3in • Height: 1.5in • Depth: 3.4in • Weight: 1.6oz