Bravo Company144597328
Bcm Raiderm10556Bl Raider-M13 Rail Black Anodized 10.00" M-Lok Free-Floating Style Made Of Aluminum For Ar-Platform$239.00
Availability: In Stock
The Bravo Company RAIDER-M13 is a 13-inch free-floating handguard built for shooters who demand accuracy and modularity without unnecessary weight. Built from aluminum and hard-anodized in black, this rail uses a double-wall extrusion design that keeps the platform rigid where it counts—especially when you're running optics or lasers mounted directly to the handguard. The M13 works with pistol, carbine, or mid-length gas systems paired with a low-profile gas block, making it a flexible choice for a variety of AR platform builds.
The RAIDER-M13 balances practical mounting options with clean ergonomics. You get a continuous MIL-STD-1913 Picatinny rail along the top for your primary optic or sight, plus six additional Picatinny sections at 3, 6, and 9 o'clock positions. M-Lok slots at those same clock positions give you room to add vertical grips, light mounts, and other accessories without rail clutter. A series of ports along the sides and bottom let you run zip ties or MIL-SPEC cord for securing slings, cables, or other gear securely.
At 11.7 ounces, the M13 keeps your rifle's center of mass reasonable while delivering the stiffness you need for consistent zero retention. Mounting hardware is included, and installation is straightforward on any standard AR receiver extension. If you're building a DMR, patrol rifle, or precision carbine where handguard stability matters, the RAIDER-M13 gives you the foundation to run exactly what you need.
| Product | Bravo Company RAIDER-M13 Handguard |
| Length | 13 inches |
| Material | Aluminum |
| Finish | Hard-anodized black |
| Weight | 11.7 oz (handguard only) |
| Mounting Hardware Weight | 2.3 oz |
| Top Rail | MIL-STD-1913 Picatinny (full length) |
| Side/Bottom Interfaces | M-Lok slots and Picatinny rail sections at 3, 6, and 9 o'clock |
| Gas System Compatibility | Pistol, carbine, mid-length (with low-profile gas block) |
| Platform | AR-15 / AR-10 compatible |
The RAIDER-M13 is designed to work with pistol, carbine, and mid-length gas systems, provided you use a low-profile gas block. This flexibility lets you adapt the handguard to different AR builds without compatibility issues.
Yes. The handguard ships with all necessary mounting hardware (2.3 oz), so you have everything needed for installation on your AR receiver.
The double-wall aluminum extrusion design creates a stiff platform that resists flex when you mount electro-optics, lasers, or other heavy accessories to the handguard. This rigidity helps maintain zero retention and consistent performance under load.
Yes. The top features a continuous MIL-STD-1913 Picatinny rail for your primary optic, while M-Lok slots are positioned at 3, 6, and 9 o'clock for adding grips, lights, and other modular components. You can use both interfaces on the same handguard.
SKU: 144597254 • Width: 6.4in • Height: 3in • Depth: 19.8in • Weight: 1.54oz
Availability: In Stock
The Bravo Company RAIDER-M13 is a 13-inch free-floating handguard built for shooters who demand accuracy and modularity without unnecessary weight. Built from aluminum and hard-anodized in black, this rail uses a double-wall extrusion design that keeps the platform rigid where it counts—especially when you're running optics or lasers mounted directly to the handguard. The M13 works with pistol, carbine, or mid-length gas systems paired with a low-profile gas block, making it a flexible choice for a variety of AR platform builds.
The RAIDER-M13 balances practical mounting options with clean ergonomics. You get a continuous MIL-STD-1913 Picatinny rail along the top for your primary optic or sight, plus six additional Picatinny sections at 3, 6, and 9 o'clock positions. M-Lok slots at those same clock positions give you room to add vertical grips, light mounts, and other accessories without rail clutter. A series of ports along the sides and bottom let you run zip ties or MIL-SPEC cord for securing slings, cables, or other gear securely.
At 11.7 ounces, the M13 keeps your rifle's center of mass reasonable while delivering the stiffness you need for consistent zero retention. Mounting hardware is included, and installation is straightforward on any standard AR receiver extension. If you're building a DMR, patrol rifle, or precision carbine where handguard stability matters, the RAIDER-M13 gives you the foundation to run exactly what you need.
| Product | Bravo Company RAIDER-M13 Handguard |
| Length | 13 inches |
| Material | Aluminum |
| Finish | Hard-anodized black |
| Weight | 11.7 oz (handguard only) |
| Mounting Hardware Weight | 2.3 oz |
| Top Rail | MIL-STD-1913 Picatinny (full length) |
| Side/Bottom Interfaces | M-Lok slots and Picatinny rail sections at 3, 6, and 9 o'clock |
| Gas System Compatibility | Pistol, carbine, mid-length (with low-profile gas block) |
| Platform | AR-15 / AR-10 compatible |
The RAIDER-M13 is designed to work with pistol, carbine, and mid-length gas systems, provided you use a low-profile gas block. This flexibility lets you adapt the handguard to different AR builds without compatibility issues.
Yes. The handguard ships with all necessary mounting hardware (2.3 oz), so you have everything needed for installation on your AR receiver.
The double-wall aluminum extrusion design creates a stiff platform that resists flex when you mount electro-optics, lasers, or other heavy accessories to the handguard. This rigidity helps maintain zero retention and consistent performance under load.
Yes. The top features a continuous MIL-STD-1913 Picatinny rail for your primary optic, while M-Lok slots are positioned at 3, 6, and 9 o'clock for adding grips, lights, and other modular components. You can use both interfaces on the same handguard.
SKU: 144597254 • Width: 6.4in • Height: 3in • Depth: 19.8in • Weight: 1.54oz