Battle Arms Development121688884
Battle Arms Development Enhanced Pin Set Kit for AR Rifles - Model 100-015-185$49.95
Availability: In Stock
The Battle Arms Development Enhanced Pin Set for LR-308/SR-25/AR308 rifles is a precision upgrade designed for shooters who want better control and durability from their .308 platform. If you run a DPMS 308 receiver and are tired of wrestling with sloppy mil-spec pins or worried about marring your receiver during disassembly, this American-made pin set delivers noticeable improvements in grip, durability, and ease of use without oversized heads that get in the way.
BAD engineered these pins with patent-pending head designs that give you substantially better gripping surface and pull strength compared to standard takedown and pivot pins. The pins are CNC machined from steel and case-hardened with mil-spec black manganese phosphate finish for long-term reliability. The extended tips—roughly 0.030" longer than mil-spec—make it easier to push pins out from the left side of the receiver, while cone-shaped bullet tip guides at both ends protect your receiver from accidental scratches or tool slip during field stripping. Low-profile heads mean these pins stay out of the way and won't interfere with ambidextrous safety selectors on the right side.
This is the kind of upgrade that matters if you're swapping uppers frequently, running drills at the range, or just tired of the friction and slop that comes with standard hardware. The set is lightweight (combined weight of just 0.74 oz) and comes complete with hardened stainless steel detents and 17-7 nickel-plated pin springs, so you have everything needed for a clean installation.
| Brand | Battle Arms Development |
| Platform | LR-308/SR-25/AR308 (DPMS 308 variants) |
| Set Contents | (1) Enhanced Takedown Pin (BAD-ETP-308), (1) Enhanced Pivot Pin (BAD-EPP-308), (2) hardened stainless steel detents, (2) 17-7 nickel-plated pin springs |
| Material | Steel (CNC machined, case-hardened) |
| Finish | Mil-spec black manganese phosphate |
| Pin Tip Length | +0.030" over mil-spec |
| Combined Set Weight | 0.74 oz |
| Origin | USA |
Yes. The Battle Arms Development Enhanced Pin Set is designed for all DPMS 308 variant receivers, including LR-308 and SR-25 style builds.
No. The enhanced takedown pin head design is specifically engineered to not obstruct the right-side safety lever on ambidextrous safety selectors.
Each set includes one enhanced takedown pin, one enhanced pivot pin, two hardened stainless steel detents, and two 17-7 nickel-plated pin springs—everything you need for installation.
The extended tips (0.030" longer) make it noticeably easier to push the pins out from the left side of the receiver during disassembly, without excessive protrusion that creates dragging or gets in the way.
SKU: 115783814 • Width: 3.25in • Height: 1in • Depth: 5.5in • Weight: 0.13oz
Availability: In Stock
The Battle Arms Development Enhanced Pin Set for LR-308/SR-25/AR308 rifles is a precision upgrade designed for shooters who want better control and durability from their .308 platform. If you run a DPMS 308 receiver and are tired of wrestling with sloppy mil-spec pins or worried about marring your receiver during disassembly, this American-made pin set delivers noticeable improvements in grip, durability, and ease of use without oversized heads that get in the way.
BAD engineered these pins with patent-pending head designs that give you substantially better gripping surface and pull strength compared to standard takedown and pivot pins. The pins are CNC machined from steel and case-hardened with mil-spec black manganese phosphate finish for long-term reliability. The extended tips—roughly 0.030" longer than mil-spec—make it easier to push pins out from the left side of the receiver, while cone-shaped bullet tip guides at both ends protect your receiver from accidental scratches or tool slip during field stripping. Low-profile heads mean these pins stay out of the way and won't interfere with ambidextrous safety selectors on the right side.
This is the kind of upgrade that matters if you're swapping uppers frequently, running drills at the range, or just tired of the friction and slop that comes with standard hardware. The set is lightweight (combined weight of just 0.74 oz) and comes complete with hardened stainless steel detents and 17-7 nickel-plated pin springs, so you have everything needed for a clean installation.
| Brand | Battle Arms Development |
| Platform | LR-308/SR-25/AR308 (DPMS 308 variants) |
| Set Contents | (1) Enhanced Takedown Pin (BAD-ETP-308), (1) Enhanced Pivot Pin (BAD-EPP-308), (2) hardened stainless steel detents, (2) 17-7 nickel-plated pin springs |
| Material | Steel (CNC machined, case-hardened) |
| Finish | Mil-spec black manganese phosphate |
| Pin Tip Length | +0.030" over mil-spec |
| Combined Set Weight | 0.74 oz |
| Origin | USA |
Yes. The Battle Arms Development Enhanced Pin Set is designed for all DPMS 308 variant receivers, including LR-308 and SR-25 style builds.
No. The enhanced takedown pin head design is specifically engineered to not obstruct the right-side safety lever on ambidextrous safety selectors.
Each set includes one enhanced takedown pin, one enhanced pivot pin, two hardened stainless steel detents, and two 17-7 nickel-plated pin springs—everything you need for installation.
The extended tips (0.030" longer) make it noticeably easier to push the pins out from the left side of the receiver during disassembly, without excessive protrusion that creates dragging or gets in the way.
SKU: 115783814 • Width: 3.25in • Height: 1in • Depth: 5.5in • Weight: 0.13oz