Barnett Outdoors119715155
BARR AMMO 416BARR 452GR CEB MTAC 80RD$740.00
Availability: In Stock
Current Stock: Out of stock
.416 Barrett ammunition from Barrett is purpose-built for extreme long-range shooting where most shooters have packed up and gone home. This 10-round box pairs a 452-grain Cutting Edge Metals MTAC bullet with carefully selected RUAG brass and RWS primers—components chosen for consistency, not convenience. If you're already shooting beyond 2000 yards and thinking about what's next, this is the ammunition that bridges the gap between theoretical and demonstrated capability.
The 452-grain MTAC projectile is the heart of this load. Its high ballistic coefficient (.83 G1 / .42 G7) means it shrugs off wind drift and air resistance in ways lighter .416 options cannot. That aerodynamic design is paired with a muzzle velocity of 3005 fps from a 32-inch barrel, giving you the velocity and bullet drop curve needed for targets well beyond 2500 yards. This isn't ammunition for testing—it's ammunition for confirming what your rifle and your skills can actually do.
Barrett loads these rounds to sub-MOA standards, which means if your equipment and technique are up to it, the ammunition won't be your limiting factor. The consistency that comes from match-grade assembly and quality components gives you the confidence to make first-round hits when you've got the wind dialed and the range confirmed. Ten rounds is a working quantity—enough to verify a dope card, test a load in your barrel, or execute on a planned shot sequence without the waste of a larger box.
This is specialist ammunition. It's made for shooters who understand .416 Barrett ballistics, who own the rifle it's designed for, and who shoot beyond the distances where conventional long-range practice applies. If that describes your setup and your ambition, this ammunition will perform exactly as promised.
| Caliber | .416 Barrett |
| Bullet Weight | 452 grains |
| Bullet Type | Cutting Edge Metals MTAC |
| Ballistic Coefficient (G1) | 0.83 |
| Ballistic Coefficient (G7) | 0.42 |
| Muzzle Velocity | 3005 fps (32-inch barrel) |
| Case | RUAG brass |
| Primer | RWS |
| Quantity | 10 rounds |
| Overall Length | 4.65 inches |
| Bullet Diameter | 0.416 inches |
.416 Barrett is designed for extreme long-range shooting, typically at distances well beyond 2000 yards. This particular load is engineered for shooters pursuing targets at ranges exceeding 2500 yards where ballistic precision and high sectional density are critical.
This ammunition is loaded for .416 Barrett specifically. Verify that your rifle is chambered in .416 Barrett before purchasing. These rounds are not compatible with other .416 cartridges.
You receive 10 individually loaded rounds. Each round contains a 452-grain Cutting Edge Metals MTAC bullet, RUAG brass case, and RWS primer, assembled to match-grade standards.
This is loaded as match-grade ammunition with careful attention to consistency. The use of RUAG brass and RWS primers, combined with Barrett's assembly process, is designed to support sub-MOA performance. Individual results depend on your rifle, barrel, and shooting technique, but the ammunition is built to remove consistency as a variable.
SKU: 119718088 • Weight: 2.54oz
Availability: In Stock
Current Stock: Out of stock
.416 Barrett ammunition from Barrett is purpose-built for extreme long-range shooting where most shooters have packed up and gone home. This 10-round box pairs a 452-grain Cutting Edge Metals MTAC bullet with carefully selected RUAG brass and RWS primers—components chosen for consistency, not convenience. If you're already shooting beyond 2000 yards and thinking about what's next, this is the ammunition that bridges the gap between theoretical and demonstrated capability.
The 452-grain MTAC projectile is the heart of this load. Its high ballistic coefficient (.83 G1 / .42 G7) means it shrugs off wind drift and air resistance in ways lighter .416 options cannot. That aerodynamic design is paired with a muzzle velocity of 3005 fps from a 32-inch barrel, giving you the velocity and bullet drop curve needed for targets well beyond 2500 yards. This isn't ammunition for testing—it's ammunition for confirming what your rifle and your skills can actually do.
Barrett loads these rounds to sub-MOA standards, which means if your equipment and technique are up to it, the ammunition won't be your limiting factor. The consistency that comes from match-grade assembly and quality components gives you the confidence to make first-round hits when you've got the wind dialed and the range confirmed. Ten rounds is a working quantity—enough to verify a dope card, test a load in your barrel, or execute on a planned shot sequence without the waste of a larger box.
This is specialist ammunition. It's made for shooters who understand .416 Barrett ballistics, who own the rifle it's designed for, and who shoot beyond the distances where conventional long-range practice applies. If that describes your setup and your ambition, this ammunition will perform exactly as promised.
| Caliber | .416 Barrett |
| Bullet Weight | 452 grains |
| Bullet Type | Cutting Edge Metals MTAC |
| Ballistic Coefficient (G1) | 0.83 |
| Ballistic Coefficient (G7) | 0.42 |
| Muzzle Velocity | 3005 fps (32-inch barrel) |
| Case | RUAG brass |
| Primer | RWS |
| Quantity | 10 rounds |
| Overall Length | 4.65 inches |
| Bullet Diameter | 0.416 inches |
.416 Barrett is designed for extreme long-range shooting, typically at distances well beyond 2000 yards. This particular load is engineered for shooters pursuing targets at ranges exceeding 2500 yards where ballistic precision and high sectional density are critical.
This ammunition is loaded for .416 Barrett specifically. Verify that your rifle is chambered in .416 Barrett before purchasing. These rounds are not compatible with other .416 cartridges.
You receive 10 individually loaded rounds. Each round contains a 452-grain Cutting Edge Metals MTAC bullet, RUAG brass case, and RWS primer, assembled to match-grade standards.
This is loaded as match-grade ammunition with careful attention to consistency. The use of RUAG brass and RWS primers, combined with Barrett's assembly process, is designed to support sub-MOA performance. Individual results depend on your rifle, barrel, and shooting technique, but the ammunition is built to remove consistency as a variable.
SKU: 119718088 • Weight: 2.54oz