Barnes Bullets115716213
Barnes Triple-Shock X (TSX) 22 Caliber 62 Grain HPBT Lead-Free Bullets - Box of 50$37.54
Availability: In Stock
Barnes Triple-Shock X (TSX) bullets in 22 caliber are engineered for reloaders seeking reliable, lead-free ammunition that delivers consistent performance on small to medium game. Built entirely from copper, these 70-grain hollow-point boat-tail projectiles are designed to expand on impact while maintaining structural integrity—a combination that appeals to hunters and precision shooters who demand both ethical terminal performance and predictable ballistics. Whether you're handloading for varmint hunting, target shooting, or small-game pursuits, TSX bullets give you the control over your loads that factory ammo can't match.
The TSX design hinges on its patented solid-copper construction, which eliminates the lead-core separation problems that plagued traditional bonded bullets. Upon impact, the bullet expands to form four razor-sharp petals that cut deep into tissue while the solid body resists deformation—a feature Barnes emphasizes for hunters who prioritize one-shot reliability. The 100 percent weight retention means energy transfer and penetration remain consistent across varying distances and target densities, a critical advantage when hunting in brush or dense cover where shot placement may be challenging.
Reloading with TSX bullets requires attention to seating depth; Barnes recommends seating your rounds 0.03 to 0.07 inches off the lands, though your individual rifle's chamber will determine the optimal setting. This tolerance range reflects the bullet's design and the variability inherent in different firearms. A box of 50 bullets gives you the volume needed to develop and test loads without excessive cost, and the lead-free composition makes these rounds compliant with regulations in areas where lead ammunition is restricted.
TSX bullets are a workhorse choice for handloaders who value precision, consistency, and terminal performance in one package. They're not premium match bullets for benchrest shooting, but rather a solid, dependable option for hunting and field applications where durability and expansion matter more than sub-MOA accuracy.
| Caliber | 22 caliber |
| Weight | 70 grains |
| Bullet Type | Hollow-Point Boat-Tail (HPBT) |
| Material | 100% Copper |
| Quantity | Box of 50 |
| Recommended Seating Depth | 0.03 to 0.07 inches off lands (rifle-dependent) |
Yes. The 70-grain TSX in 22 caliber is designed for hunting applications where expansion and penetration are important. The copper construction and four-petal design make it a solid choice for small to medium game, though your specific hunting needs and local regulations should guide your load development.
Barnes TSX bullets are 100 percent copper, which makes them compliant in areas where lead ammunition is restricted or prohibited. Lead-free bullets also eliminate concerns about lead exposure during reloading and shooting, a consideration for frequent shooters and those handling ammunition in enclosed spaces.
No. TSX bullets work with standard reloading dies and presses. However, you'll need to establish the correct seating depth for your specific rifle; Barnes recommends starting between 0.03 and 0.07 inches off the lands and adjusting based on your rifle's chamber and your accuracy testing.
Expansion and terminal performance depend on impact velocity and target material. While the TSX design is engineered for consistent performance, actual results vary with load, distance, and game. Seating depth should also be tailored to your rifle's chamber for optimal accuracy and reliability.
SKU: 115653713 • Width: 1.8in • Height: 1.3in • Depth: 2.9in • Weight: 0.55oz
Availability: In Stock
Barnes Triple-Shock X (TSX) bullets in 22 caliber are engineered for reloaders seeking reliable, lead-free ammunition that delivers consistent performance on small to medium game. Built entirely from copper, these 70-grain hollow-point boat-tail projectiles are designed to expand on impact while maintaining structural integrity—a combination that appeals to hunters and precision shooters who demand both ethical terminal performance and predictable ballistics. Whether you're handloading for varmint hunting, target shooting, or small-game pursuits, TSX bullets give you the control over your loads that factory ammo can't match.
The TSX design hinges on its patented solid-copper construction, which eliminates the lead-core separation problems that plagued traditional bonded bullets. Upon impact, the bullet expands to form four razor-sharp petals that cut deep into tissue while the solid body resists deformation—a feature Barnes emphasizes for hunters who prioritize one-shot reliability. The 100 percent weight retention means energy transfer and penetration remain consistent across varying distances and target densities, a critical advantage when hunting in brush or dense cover where shot placement may be challenging.
Reloading with TSX bullets requires attention to seating depth; Barnes recommends seating your rounds 0.03 to 0.07 inches off the lands, though your individual rifle's chamber will determine the optimal setting. This tolerance range reflects the bullet's design and the variability inherent in different firearms. A box of 50 bullets gives you the volume needed to develop and test loads without excessive cost, and the lead-free composition makes these rounds compliant with regulations in areas where lead ammunition is restricted.
TSX bullets are a workhorse choice for handloaders who value precision, consistency, and terminal performance in one package. They're not premium match bullets for benchrest shooting, but rather a solid, dependable option for hunting and field applications where durability and expansion matter more than sub-MOA accuracy.
| Caliber | 22 caliber |
| Weight | 70 grains |
| Bullet Type | Hollow-Point Boat-Tail (HPBT) |
| Material | 100% Copper |
| Quantity | Box of 50 |
| Recommended Seating Depth | 0.03 to 0.07 inches off lands (rifle-dependent) |
Yes. The 70-grain TSX in 22 caliber is designed for hunting applications where expansion and penetration are important. The copper construction and four-petal design make it a solid choice for small to medium game, though your specific hunting needs and local regulations should guide your load development.
Barnes TSX bullets are 100 percent copper, which makes them compliant in areas where lead ammunition is restricted or prohibited. Lead-free bullets also eliminate concerns about lead exposure during reloading and shooting, a consideration for frequent shooters and those handling ammunition in enclosed spaces.
No. TSX bullets work with standard reloading dies and presses. However, you'll need to establish the correct seating depth for your specific rifle; Barnes recommends starting between 0.03 and 0.07 inches off the lands and adjusting based on your rifle's chamber and your accuracy testing.
Expansion and terminal performance depend on impact velocity and target material. While the TSX design is engineered for consistent performance, actual results vary with load, distance, and game. Seating depth should also be tailored to your rifle's chamber for optimal accuracy and reliability.
SKU: 115653713 • Width: 1.8in • Height: 1.3in • Depth: 2.9in • Weight: 0.55oz