Availability: In Stock
The Banish 9 is a 9mm silencer built from Inconel and finished in black oxide, engineered for shooters who demand durability and reliability from their suppression equipment. This model is threaded for M13.5x1 left-hand mounting, a common configuration on certain modern hosts. Whether you're running precision rifle drills at the range, hunting with subsonic rounds, or shooting suppressed pistol caliber carbines, the Banish 9 delivers the sound reduction and performance you expect from a purpose-built suppressor.
Inconel construction sets this suppressor apart. It's a high-temperature, corrosion-resistant superalloy that handles sustained firing and the thermal cycling of rapid shooting far better than traditional stainless steel. The black oxide finish is both functional and clean-looking—it resists rust and fingerprints while keeping the profile understated on your rifle. If you're building a dedicated 9mm or 300 Blackout host and need a suppressor that won't flinch under serious use, the Banish 9 is worth your attention.
Banish suppressors are manufactured by Silencer Central, a company with deep roots in the silencer industry. The Banish line represents a balance of thoughtful engineering and real-world reliability. Before purchasing any suppressor, remember that you'll need to complete the required federal registration and transfer process through an SOT dealer in your state—suppressors aren't mail-to-door items. Once registered and in hand, you'll have a tool that makes your shooting more comfortable and respectful to everyone downrange.
| Brand | Banish (Silencer Central) |
| Model | Banish 9 |
| Thread Pattern | M13.5x1 LH (Left-Hand) |
| Material | Inconel |
| Finish | Black Oxide |
The Banish 9 is threaded M13.5x1 left-hand, so it will fit any 9mm or subsonic rifle barrel with that thread pitch and direction. Common hosts include certain modern 300 Blackout AR-15s and dedicated 9mm suppressed platforms. Always verify your barrel's thread spec before purchase.
Suppressors are legal in most US states, but ownership requires federal registration through an ATF Form 4 (or eForm 4) and compliance with your state and local laws. You cannot receive a suppressor by mail; it must be transferred through a licensed SOT dealer. Check your local regulations before ordering.
Inconel is a superalloy designed to resist extreme heat and corrosion. In a suppressor, it means longer life under sustained fire, better performance with hot and rapid shooting cycles, and greater reliability in harsh conditions compared to standard stainless construction.
The Banish 9 is designed for 9mm and subsonic rifle loads. Always use subsonic ammunition (typically 300 Blackout or similar, under 1,125 fps) in rifle suppressors to avoid baffle strikes and optimize sound reduction. Do not exceed the manufacturer's recommendations.
SKU: 194197902 • Width: 3in • Height: 0.6in • Depth: 4.9in • Weight: 0.05oz
Availability: In Stock
The Banish 9 is a 9mm silencer built from Inconel and finished in black oxide, engineered for shooters who demand durability and reliability from their suppression equipment. This model is threaded for M13.5x1 left-hand mounting, a common configuration on certain modern hosts. Whether you're running precision rifle drills at the range, hunting with subsonic rounds, or shooting suppressed pistol caliber carbines, the Banish 9 delivers the sound reduction and performance you expect from a purpose-built suppressor.
Inconel construction sets this suppressor apart. It's a high-temperature, corrosion-resistant superalloy that handles sustained firing and the thermal cycling of rapid shooting far better than traditional stainless steel. The black oxide finish is both functional and clean-looking—it resists rust and fingerprints while keeping the profile understated on your rifle. If you're building a dedicated 9mm or 300 Blackout host and need a suppressor that won't flinch under serious use, the Banish 9 is worth your attention.
Banish suppressors are manufactured by Silencer Central, a company with deep roots in the silencer industry. The Banish line represents a balance of thoughtful engineering and real-world reliability. Before purchasing any suppressor, remember that you'll need to complete the required federal registration and transfer process through an SOT dealer in your state—suppressors aren't mail-to-door items. Once registered and in hand, you'll have a tool that makes your shooting more comfortable and respectful to everyone downrange.
| Brand | Banish (Silencer Central) |
| Model | Banish 9 |
| Thread Pattern | M13.5x1 LH (Left-Hand) |
| Material | Inconel |
| Finish | Black Oxide |
The Banish 9 is threaded M13.5x1 left-hand, so it will fit any 9mm or subsonic rifle barrel with that thread pitch and direction. Common hosts include certain modern 300 Blackout AR-15s and dedicated 9mm suppressed platforms. Always verify your barrel's thread spec before purchase.
Suppressors are legal in most US states, but ownership requires federal registration through an ATF Form 4 (or eForm 4) and compliance with your state and local laws. You cannot receive a suppressor by mail; it must be transferred through a licensed SOT dealer. Check your local regulations before ordering.
Inconel is a superalloy designed to resist extreme heat and corrosion. In a suppressor, it means longer life under sustained fire, better performance with hot and rapid shooting cycles, and greater reliability in harsh conditions compared to standard stainless construction.
The Banish 9 is designed for 9mm and subsonic rifle loads. Always use subsonic ammunition (typically 300 Blackout or similar, under 1,125 fps) in rifle suppressors to avoid baffle strikes and optimize sound reduction. Do not exceed the manufacturer's recommendations.
SKU: 194197902 • Width: 3in • Height: 0.6in • Depth: 4.9in • Weight: 0.05oz