Ballistic Advantage115859916
Ballistic 308 Win 16" Mid-Length Hanson Profile Barrel$275.50
Availability: In Stock
The Ballistic Advantage Ballistic 6.5cm Mid-Length Hanson Profile Barrel gives you a genuine accuracy upgrade over a standard .308 AR build without the headache of a complete rebuild. Swap this 6.5 Creedmoor barrel into your existing DPMS-pattern rifle, keep your bolt and magazines unchanged, and you're shooting one of the flattest, softest-recoiling mid-range cartridges available. The 6.5mm projectile itself is inherently accurate, match-grade factory ammo is now readily available, and the recoil impulse is noticeably gentler than .308—all of which stack the deck in your favor on the range or in the field.
Built from 416R stainless steel and finished with a QPQ corrosion-resistant coating, this barrel is proof-fired and MPI-tested at the factory to confirm reliability and consistency. The Hanson profile is Ballistic Advantage's own design, engineered to balance rigidity with a reasonable weight that won't strain your rifle's ergonomics. A pinned lo-pro gas block comes installed, so you're not hunting down compatibility parts before you can shoot. Just be aware: Hanson barrels are not designed to work with aftermarket piston systems, so stick with standard direct-impingement setups.
Whether you're building a mid-range hunting rifle, setting up a precision .308-platform shooter, or upgrading an existing gun for better accuracy and less fatigue, a 6.5 Creedmoor conversion is one of the easiest, most effective swaps you can make. This barrel gives you the quality control and accuracy pedigree Ballistic Advantage is known for, without the guesswork of surplus or economy barrels.
| Caliber | 6.5 Creedmoor (6.5cm) |
| Barrel Profile | Hanson (BA proprietary design) |
| Material | 416R Stainless Steel |
| Finish | QPQ Corrosion Resistant |
| Gas System | Mid-Length |
| Pattern | DPMS-style |
| Included | Pinned lo-pro gas block |
| Testing | Proof-fired and MPI-tested |
Yes, as long as your rifle is DPMS-pattern (the most common large-frame AR platform). You'll swap the barrel, install this one, and everything else—bolt, magazines, gas tube—remains compatible. No other parts need to be changed.
No. Hanson barrels are not designed to work with aftermarket piston kits. They are optimized for standard direct-impingement setups.
The 6.5mm projectile is inherently accurate, recoil is significantly softer than .308, and match-grade factory ammunition is now widely available off-the-shelf. Many shooters find the combination of lower recoil, flatter trajectory, and proven accuracy makes 6.5 Creedmoor one of the best choices for mid-range precision shooting and hunting.
Every barrel is proof-fired and MPI (Magnetic Particle Inspection) tested at the factory to ensure quality and reliability before shipment.
SKU: 115648338 • Weight: 1oz
Availability: In Stock
The Ballistic Advantage Ballistic 6.5cm Mid-Length Hanson Profile Barrel gives you a genuine accuracy upgrade over a standard .308 AR build without the headache of a complete rebuild. Swap this 6.5 Creedmoor barrel into your existing DPMS-pattern rifle, keep your bolt and magazines unchanged, and you're shooting one of the flattest, softest-recoiling mid-range cartridges available. The 6.5mm projectile itself is inherently accurate, match-grade factory ammo is now readily available, and the recoil impulse is noticeably gentler than .308—all of which stack the deck in your favor on the range or in the field.
Built from 416R stainless steel and finished with a QPQ corrosion-resistant coating, this barrel is proof-fired and MPI-tested at the factory to confirm reliability and consistency. The Hanson profile is Ballistic Advantage's own design, engineered to balance rigidity with a reasonable weight that won't strain your rifle's ergonomics. A pinned lo-pro gas block comes installed, so you're not hunting down compatibility parts before you can shoot. Just be aware: Hanson barrels are not designed to work with aftermarket piston systems, so stick with standard direct-impingement setups.
Whether you're building a mid-range hunting rifle, setting up a precision .308-platform shooter, or upgrading an existing gun for better accuracy and less fatigue, a 6.5 Creedmoor conversion is one of the easiest, most effective swaps you can make. This barrel gives you the quality control and accuracy pedigree Ballistic Advantage is known for, without the guesswork of surplus or economy barrels.
| Caliber | 6.5 Creedmoor (6.5cm) |
| Barrel Profile | Hanson (BA proprietary design) |
| Material | 416R Stainless Steel |
| Finish | QPQ Corrosion Resistant |
| Gas System | Mid-Length |
| Pattern | DPMS-style |
| Included | Pinned lo-pro gas block |
| Testing | Proof-fired and MPI-tested |
Yes, as long as your rifle is DPMS-pattern (the most common large-frame AR platform). You'll swap the barrel, install this one, and everything else—bolt, magazines, gas tube—remains compatible. No other parts need to be changed.
No. Hanson barrels are not designed to work with aftermarket piston kits. They are optimized for standard direct-impingement setups.
The 6.5mm projectile is inherently accurate, recoil is significantly softer than .308, and match-grade factory ammunition is now widely available off-the-shelf. Many shooters find the combination of lower recoil, flatter trajectory, and proven accuracy makes 6.5 Creedmoor one of the best choices for mid-range precision shooting and hunting.
Every barrel is proof-fired and MPI (Magnetic Particle Inspection) tested at the factory to ensure quality and reliability before shipment.
SKU: 115648338 • Weight: 1oz