Ballistic Advantage115653836
Premium Ballistic Advantage 18" 223 Wylde SPR Fluted Barrel - Stainless Bead Blasted Finish for AR-15$256.50
Availability: In Stock
The Ballistic Advantage Premium 6.5 Creedmoor 22" Stainless Barrel is built for shooters who want to drop a match-grade barrel into an existing AR-10 platform without a complete rebuild. Machined from 416R stainless steel and finished with a bead blast, this barrel handles the inherent accuracy of the 6.5 Creedmoor round while keeping recoil soft enough for fast, accurate follow-ups. It's proof fired and MPI tested to ensure consistency shot to shot — the kind of quality control that matters when you're chasing tight groups at distance.
The 22-inch length and .936" gas block bore make this a straightforward swap into most AR-10 builds. Since 6.5 Creedmoor uses the same bolt face and magazine as .308 Winchester, you're not hunting for new parts; everything else stays the same. That means less guesswork, faster turnaround, and more time on the range. Factory match-grade 6.5 Creedmoor ammunition is plentiful and affordable compared to even a few years ago, making this cartridge a genuinely practical choice for long-range hunting and precision rifle competition.
The stainless steel construction gives you corrosion resistance and the durability to handle hard use in variable weather. Whether you're setting up a dedicated target rifle, upgrading a hunt gun, or building your first AR-10, this barrel delivers the accuracy and reliability that serious shooters expect.
| Caliber | 6.5 Creedmoor |
| Barrel Length | 22 inches |
| Material | 416R Stainless Steel |
| Finish | Bead Blasted |
| Gas Block Bore Diameter | .936 inches |
| Platform Compatibility | AR-10 (DPMS style) |
| Testing | Proof fired and MPI tested |
Yes. The 6.5 Creedmoor uses the same bolt face, firing pin, and magazine as .308 Winchester. A barrel swap is all you need — your existing lower, bolt, and magazines are fully compatible.
Magnetic Particle Inspection (MPI) is a non-destructive test that detects surface and near-surface defects in steel. Combined with proof firing, it confirms the barrel meets quality and safety standards before it ships.
Factory match-grade 6.5 Creedmoor ammunition is widely available from most major ammunition manufacturers, making it practical and affordable for hunting and range work.
The .936" measurement is the diameter of the barrel at the gas block station. This is the standard size for AR-10 platforms and ensures your gas block will fit and function properly.
SKU: 115648021 • Width: 1.25in • Height: 1.25in • Depth: 25.5in • Weight: 5.19oz
Availability: In Stock
The Ballistic Advantage Premium 6.5 Creedmoor 22" Stainless Barrel is built for shooters who want to drop a match-grade barrel into an existing AR-10 platform without a complete rebuild. Machined from 416R stainless steel and finished with a bead blast, this barrel handles the inherent accuracy of the 6.5 Creedmoor round while keeping recoil soft enough for fast, accurate follow-ups. It's proof fired and MPI tested to ensure consistency shot to shot — the kind of quality control that matters when you're chasing tight groups at distance.
The 22-inch length and .936" gas block bore make this a straightforward swap into most AR-10 builds. Since 6.5 Creedmoor uses the same bolt face and magazine as .308 Winchester, you're not hunting for new parts; everything else stays the same. That means less guesswork, faster turnaround, and more time on the range. Factory match-grade 6.5 Creedmoor ammunition is plentiful and affordable compared to even a few years ago, making this cartridge a genuinely practical choice for long-range hunting and precision rifle competition.
The stainless steel construction gives you corrosion resistance and the durability to handle hard use in variable weather. Whether you're setting up a dedicated target rifle, upgrading a hunt gun, or building your first AR-10, this barrel delivers the accuracy and reliability that serious shooters expect.
| Caliber | 6.5 Creedmoor |
| Barrel Length | 22 inches |
| Material | 416R Stainless Steel |
| Finish | Bead Blasted |
| Gas Block Bore Diameter | .936 inches |
| Platform Compatibility | AR-10 (DPMS style) |
| Testing | Proof fired and MPI tested |
Yes. The 6.5 Creedmoor uses the same bolt face, firing pin, and magazine as .308 Winchester. A barrel swap is all you need — your existing lower, bolt, and magazines are fully compatible.
Magnetic Particle Inspection (MPI) is a non-destructive test that detects surface and near-surface defects in steel. Combined with proof firing, it confirms the barrel meets quality and safety standards before it ships.
Factory match-grade 6.5 Creedmoor ammunition is widely available from most major ammunition manufacturers, making it practical and affordable for hunting and range work.
The .936" measurement is the diameter of the barrel at the gas block station. This is the standard size for AR-10 platforms and ensures your gas block will fit and function properly.
SKU: 115648021 • Width: 1.25in • Height: 1.25in • Depth: 25.5in • Weight: 5.19oz