Luth-Ar115765165
Luth-AR Carbine 6-Position Mil-Spec Buffer Tube Black$25.48
Loading...
Loading...
Loading...
Availability: In Stock
The BAD 6-Position Mil-Spec Buffer Tube in Olive Drab Green is a precision receiver extension built for AR-15, M16, and M4 platforms that demand durability without compromise. Battle Arms Development machines this tube from 7075-T6 aircraft-grade aluminum—the same material used in aerospace applications—then impact forges and hard anodizes it in OD green for corrosion resistance and a clean tactical look. Whether you're building a new carbine, upgrading an existing rifle, or swapping components for a different shooting setup, this mil-spec tube gives you six positions of length-of-pull adjustment to dial in the perfect cheek weld and control feel.
A mil-spec carbine-length receiver extension is the foundation of any AR platform stock system. This one's made in the USA and engineered to the military specification that has proven reliable across decades of service rifle use. The precision CNC machining and impact forging process ensure consistent lockup with your lower receiver and buffer components—no wobble, no surprises when rounds go downrange. The six-position design lets you optimize fit whether you're shooting prone, from a bench, or in tactical gear.
Note: This tube does not include the buffer, buffer spring, castle nut, or end plate. You'll need those components separately to complete your build, but if you're upgrading an existing rifle, you may already have spares on hand. The OD green finish pairs well with modern furniture aesthetics and holds up to field use better than bare aluminum.
| Brand | Battle Arms Development (B.A.D.) |
| Product Type | Mil-Spec Carbine Buffer Tube / Receiver Extension |
| Material | 7075-T6 Aircraft-Grade Aluminum |
| Finish | Hard Anodized Olive Drab Green |
| Positions | 6 |
| Compatibility | AR-15, M16, M4 Lower Receivers (Mil-Spec) |
| Manufacturing | Precision CNC, Impact Forged, Made in USA |
| Included Components | Receiver Extension Only |
| Not Included | Buffer, Buffer Spring, Castle Nut, End Plate |
Yes, the BAD 6-Position Mil-Spec Buffer Tube is designed for all standard AR-15, M16, and M4 lower receivers that accept mil-spec receiver extensions. Verify your lower is mil-spec spec if you're unsure.
The tube itself only. You will need to source a buffer, buffer spring, castle nut, and end plate separately to complete the assembly. If you're replacing a tube on an existing rifle, you can reuse those components.
7075-T6 is aerospace-grade material chosen for its strength-to-weight ratio and corrosion resistance when properly anodized. Battle Arms Development uses impact forging to further strengthen the tube, ensuring reliability under the pressures of live fire and repeated cycling.
Yes. The BAD 6-Position Buffer Tube is manufactured in the United States.
SKU: 115686927 • Width: 6in • Height: 1.75in • Depth: 12.75in • Weight: 0.31oz
Availability: In Stock
The BAD 6-Position Mil-Spec Buffer Tube in Olive Drab Green is a precision receiver extension built for AR-15, M16, and M4 platforms that demand durability without compromise. Battle Arms Development machines this tube from 7075-T6 aircraft-grade aluminum—the same material used in aerospace applications—then impact forges and hard anodizes it in OD green for corrosion resistance and a clean tactical look. Whether you're building a new carbine, upgrading an existing rifle, or swapping components for a different shooting setup, this mil-spec tube gives you six positions of length-of-pull adjustment to dial in the perfect cheek weld and control feel.
A mil-spec carbine-length receiver extension is the foundation of any AR platform stock system. This one's made in the USA and engineered to the military specification that has proven reliable across decades of service rifle use. The precision CNC machining and impact forging process ensure consistent lockup with your lower receiver and buffer components—no wobble, no surprises when rounds go downrange. The six-position design lets you optimize fit whether you're shooting prone, from a bench, or in tactical gear.
Note: This tube does not include the buffer, buffer spring, castle nut, or end plate. You'll need those components separately to complete your build, but if you're upgrading an existing rifle, you may already have spares on hand. The OD green finish pairs well with modern furniture aesthetics and holds up to field use better than bare aluminum.
| Brand | Battle Arms Development (B.A.D.) |
| Product Type | Mil-Spec Carbine Buffer Tube / Receiver Extension |
| Material | 7075-T6 Aircraft-Grade Aluminum |
| Finish | Hard Anodized Olive Drab Green |
| Positions | 6 |
| Compatibility | AR-15, M16, M4 Lower Receivers (Mil-Spec) |
| Manufacturing | Precision CNC, Impact Forged, Made in USA |
| Included Components | Receiver Extension Only |
| Not Included | Buffer, Buffer Spring, Castle Nut, End Plate |
Yes, the BAD 6-Position Mil-Spec Buffer Tube is designed for all standard AR-15, M16, and M4 lower receivers that accept mil-spec receiver extensions. Verify your lower is mil-spec spec if you're unsure.
The tube itself only. You will need to source a buffer, buffer spring, castle nut, and end plate separately to complete the assembly. If you're replacing a tube on an existing rifle, you can reuse those components.
7075-T6 is aerospace-grade material chosen for its strength-to-weight ratio and corrosion resistance when properly anodized. Battle Arms Development uses impact forging to further strengthen the tube, ensuring reliability under the pressures of live fire and repeated cycling.
Yes. The BAD 6-Position Buffer Tube is manufactured in the United States.
SKU: 115686927 • Width: 6in • Height: 1.75in • Depth: 12.75in • Weight: 0.31oz