Luth-Ar121686417
Luth Ar 5.5" Flash Hider$24.39
Availability: In Stock
The ARS 4-Port Egg Beater Birdcage Flash Hider is a US-manufactured muzzle device built for AK-pattern rifles chambered in 7.62x39mm. This is the modernized American take on the classic Bulgarian military flash hider—a proven design that's become iconic among AK builders and shooters who want authentic styling without sacrificing quality or durability. With 24x1.5mm right-hand threads and stainless steel construction topped with a Cerakote finish, it delivers the rugged, distinctive look that sets it apart from generic brake designs while holding up to hard use.
If you're running a 7.62x39 AK and looking to round out the build with a historically accurate muzzle device that actually works, the egg beater design has earned its reputation. The four-port configuration helps redirect muzzle flash away from your sight picture, and the iconic birdcage shape is unmistakable on the line or in the field. Because it's domestically manufactured, it also qualifies as a 922(r) compliance part—a practical consideration for AK builds that need to meet federal import restrictions.
Stainless steel means corrosion resistance in wet conditions, and the Cerakote coating adds an extra layer of protection and a refined finish that looks far better than bare metal. Installation is straightforward on any 7.62x39 AK with 24x1.5 threads; make sure your rifle's barrel is threaded to spec before ordering.
| Caliber/Cartridge | 7.62x39mm |
| Thread Pattern | 24x1.5mm right-hand |
| Material | Stainless steel |
| Finish | Cerakote |
| Design | 4-port egg beater / birdcage |
| Manufacture | USA |
The ARS flash hider is designed for AK-pattern rifles chambered in 7.62x39mm with a 24x1.5mm threaded barrel. Verify your rifle's barrel threading before purchase; many AKs come with this standard, but some variants may differ. If you're unsure, measure your barrel threads or consult your rifle's documentation.
Yes. The four-port design redirects flash gases away from your line of sight, which is especially useful in low-light shooting or when using optics. It's based on the Bulgarian military original, which has been field-proven for decades.
Yes. Because it's manufactured in the USA, it counts toward 922(r) compliance for AK builds with imported receivers or components. This is a key advantage if you're building a rifle that requires compliance parts.
The ARS flash hider ships as the muzzle device itself. Installation requires removal of your existing muzzle device (if any) and threading onto your barrel's 24x1.5mm threads. A timing tool or armorer's help is recommended if you need precise rotational alignment.
SKU: 115791132 • Weight: 0.28oz
Availability: In Stock
The ARS 4-Port Egg Beater Birdcage Flash Hider is a US-manufactured muzzle device built for AK-pattern rifles chambered in 7.62x39mm. This is the modernized American take on the classic Bulgarian military flash hider—a proven design that's become iconic among AK builders and shooters who want authentic styling without sacrificing quality or durability. With 24x1.5mm right-hand threads and stainless steel construction topped with a Cerakote finish, it delivers the rugged, distinctive look that sets it apart from generic brake designs while holding up to hard use.
If you're running a 7.62x39 AK and looking to round out the build with a historically accurate muzzle device that actually works, the egg beater design has earned its reputation. The four-port configuration helps redirect muzzle flash away from your sight picture, and the iconic birdcage shape is unmistakable on the line or in the field. Because it's domestically manufactured, it also qualifies as a 922(r) compliance part—a practical consideration for AK builds that need to meet federal import restrictions.
Stainless steel means corrosion resistance in wet conditions, and the Cerakote coating adds an extra layer of protection and a refined finish that looks far better than bare metal. Installation is straightforward on any 7.62x39 AK with 24x1.5 threads; make sure your rifle's barrel is threaded to spec before ordering.
| Caliber/Cartridge | 7.62x39mm |
| Thread Pattern | 24x1.5mm right-hand |
| Material | Stainless steel |
| Finish | Cerakote |
| Design | 4-port egg beater / birdcage |
| Manufacture | USA |
The ARS flash hider is designed for AK-pattern rifles chambered in 7.62x39mm with a 24x1.5mm threaded barrel. Verify your rifle's barrel threading before purchase; many AKs come with this standard, but some variants may differ. If you're unsure, measure your barrel threads or consult your rifle's documentation.
Yes. The four-port design redirects flash gases away from your line of sight, which is especially useful in low-light shooting or when using optics. It's based on the Bulgarian military original, which has been field-proven for decades.
Yes. Because it's manufactured in the USA, it counts toward 922(r) compliance for AK builds with imported receivers or components. This is a key advantage if you're building a rifle that requires compliance parts.
The ARS flash hider ships as the muzzle device itself. Installation requires removal of your existing muzzle device (if any) and threading onto your barrel's 24x1.5mm threads. A timing tool or armorer's help is recommended if you need precise rotational alignment.
SKU: 115791132 • Weight: 0.28oz