Armaspec144599475
Buffer Ar10 Gen3 4.7 Ozarmaspec Sound Mitigation$53.99
Availability: In Stock
The Armaspec Sound Mit Buffer Carbine Gen3 is a drop-in buffer system designed to replace your standard AR-15 buffer and spring with a single-stage assembly that dramatically reduces noise and felt recoil. If you're running a carbine-length system and want smoother, quieter operation—whether you're hunting in noise-sensitive areas, shooting suppressed, or just tired of spring rattle in the tube—this is a worthwhile upgrade that installs without gunsmithing.
The core innovation is simple but effective: the Gen3 design prevents the buffer spring from rubbing against the inside of your buffer tube, eliminating metallic ping and vibration that comes from traditional setups. Quieter operation means less mechanical noise signature and a more refined shooting experience. The complete system weighs just 4.41 oz for carbine length, keeping you from adding unnecessary bulk to your AR.
Setup is straightforward—the Sound Mit Buffer is a captured assembly, so you get the polymer base guide rod, spring, and buffer all working together as one unit. Because the spring weight is adjustable, you can tune the system to your specific load (important if you're running a lighter powder charge or subsonic ammo). Everything ships assembled and ready to drop into your existing buffer tube. Made in the U.S.A., it's built to the kind of durability standard you'd expect from a component that cycles thousands of times over the life of your rifle.
| Type | Carbine-Length Buffer System |
| Configuration | Single-stage captured drop-in |
| Complete System Weight | 4.41 oz |
| Included Components | Polymer base guide rod, spring, buffer |
| Spring Weight | Adjustable |
| Installation | Drop-in (no modification required) |
| Manufacturer | Armaspec (U.S.A.) |
Yes, it's a standard carbine-length buffer system designed as a drop-in replacement for any AR platform rifle configured for carbine buffer tubes. It doesn't require any modification to your receiver or tube.
The Sound Mit Buffer Gen3 ships complete with a polymer base guide rod, the spring, and the buffer itself. It's ready to install straight from the package.
Yes, the spring weight is adjustable, allowing you to tune the system to your specific ammunition and load. This is especially useful if you're running subsonic or other specialty loads.
The entire Gen3 Sound Mit Buffer assembly for carbine length weighs 4.41 oz.
SKU: 167514087 • Width: 3in • Height: 1in • Depth: 9.75in • Weight: 6.5oz
Availability: In Stock
The Armaspec Sound Mit Buffer Carbine Gen3 is a drop-in buffer system designed to replace your standard AR-15 buffer and spring with a single-stage assembly that dramatically reduces noise and felt recoil. If you're running a carbine-length system and want smoother, quieter operation—whether you're hunting in noise-sensitive areas, shooting suppressed, or just tired of spring rattle in the tube—this is a worthwhile upgrade that installs without gunsmithing.
The core innovation is simple but effective: the Gen3 design prevents the buffer spring from rubbing against the inside of your buffer tube, eliminating metallic ping and vibration that comes from traditional setups. Quieter operation means less mechanical noise signature and a more refined shooting experience. The complete system weighs just 4.41 oz for carbine length, keeping you from adding unnecessary bulk to your AR.
Setup is straightforward—the Sound Mit Buffer is a captured assembly, so you get the polymer base guide rod, spring, and buffer all working together as one unit. Because the spring weight is adjustable, you can tune the system to your specific load (important if you're running a lighter powder charge or subsonic ammo). Everything ships assembled and ready to drop into your existing buffer tube. Made in the U.S.A., it's built to the kind of durability standard you'd expect from a component that cycles thousands of times over the life of your rifle.
| Type | Carbine-Length Buffer System |
| Configuration | Single-stage captured drop-in |
| Complete System Weight | 4.41 oz |
| Included Components | Polymer base guide rod, spring, buffer |
| Spring Weight | Adjustable |
| Installation | Drop-in (no modification required) |
| Manufacturer | Armaspec (U.S.A.) |
Yes, it's a standard carbine-length buffer system designed as a drop-in replacement for any AR platform rifle configured for carbine buffer tubes. It doesn't require any modification to your receiver or tube.
The Sound Mit Buffer Gen3 ships complete with a polymer base guide rod, the spring, and the buffer itself. It's ready to install straight from the package.
Yes, the spring weight is adjustable, allowing you to tune the system to your specific ammunition and load. This is especially useful if you're running subsonic or other specialty loads.
The entire Gen3 Sound Mit Buffer assembly for carbine length weighs 4.41 oz.
SKU: 167514087 • Width: 3in • Height: 1in • Depth: 9.75in • Weight: 6.5oz