Samson Manufacturing121688339
Samson Picatinny Vertical Grip Medium Green/Black$86.63
Availability: In Stock
The Arisaka Defense Vertical Grip is a no-fuss, low-profile handguard grip for Picatinny rail systems. Built for shooters who want ergonomic control without bulk or unnecessary hardware, this vertical grip delivers the support you need on rifle builds where minimalism and reliable lockup matter. Whether you're setting up a precision rifle, a tactical carbine, or a competition gun, the Arisaka VFG solves the common problem of a cramped, uncomfortable grip while keeping your handguard clean and snag-free.
The design starts with a radiused profile that naturally guides your hand and tapers smoothly where it meets the rail—no sharp edges, no clunky brackets. What makes it stand out is the internal recoil lug: it extends from inside the grip body and clamps securely to the Picatinny rail without any visible hardware on the outside. That means no external clamp knobs to catch on gear or slow you down, and no rattle once it's locked in place. The grip is hollow, keeping weight minimal, and the recoil lug and mounting screw are captured inside—so you won't lose them if you need to remove the grip.
CNC-machined from 6061-T651 aluminum and hard-coat anodized in black, the Arisaka Vertical Grip is tough enough for hard use and built to last. Installation is straightforward with an Allen wrench, and everything you need (the grip, recoil lug, and mounting hardware) ships in the box.
| Brand | Arisaka Defense |
| Material | 6061-T651 Aluminum |
| Finish | Hard-Coat Anodized Black |
| Mount Type | Picatinny Rail |
| Mounting Hardware | 6-32x1/2" Hex Cap Head Screw |
| Tool Required | 7/64" Allen Wrench (not included) |
The Arisaka Vertical Grip is designed for standard Picatinny rails on rifle handguards and foregrips.
The grip comes with one 6-32x1/2" hex cap head screw and one VFG-P recoil lug. You'll need a 7/64" Allen wrench to install it, which is not included.
The internal recoil lug design means there are no visible clamps or knobs on the outside of the grip. This keeps your handguard profile clean and prevents snags on gear, while still delivering a secure, rattle-free lockup.
No. Both the recoil lug and mounting screw are captured inside the grip body, so they won't fall out when you take it off the rail.
SKU: 194201161 • Width: 4in • Height: 1.25in • Depth: 3.5in • Weight: 2.5oz
Availability: In Stock
The Arisaka Defense Vertical Grip is a no-fuss, low-profile handguard grip for Picatinny rail systems. Built for shooters who want ergonomic control without bulk or unnecessary hardware, this vertical grip delivers the support you need on rifle builds where minimalism and reliable lockup matter. Whether you're setting up a precision rifle, a tactical carbine, or a competition gun, the Arisaka VFG solves the common problem of a cramped, uncomfortable grip while keeping your handguard clean and snag-free.
The design starts with a radiused profile that naturally guides your hand and tapers smoothly where it meets the rail—no sharp edges, no clunky brackets. What makes it stand out is the internal recoil lug: it extends from inside the grip body and clamps securely to the Picatinny rail without any visible hardware on the outside. That means no external clamp knobs to catch on gear or slow you down, and no rattle once it's locked in place. The grip is hollow, keeping weight minimal, and the recoil lug and mounting screw are captured inside—so you won't lose them if you need to remove the grip.
CNC-machined from 6061-T651 aluminum and hard-coat anodized in black, the Arisaka Vertical Grip is tough enough for hard use and built to last. Installation is straightforward with an Allen wrench, and everything you need (the grip, recoil lug, and mounting hardware) ships in the box.
| Brand | Arisaka Defense |
| Material | 6061-T651 Aluminum |
| Finish | Hard-Coat Anodized Black |
| Mount Type | Picatinny Rail |
| Mounting Hardware | 6-32x1/2" Hex Cap Head Screw |
| Tool Required | 7/64" Allen Wrench (not included) |
The Arisaka Vertical Grip is designed for standard Picatinny rails on rifle handguards and foregrips.
The grip comes with one 6-32x1/2" hex cap head screw and one VFG-P recoil lug. You'll need a 7/64" Allen wrench to install it, which is not included.
The internal recoil lug design means there are no visible clamps or knobs on the outside of the grip. This keeps your handguard profile clean and prevents snags on gear, while still delivering a secure, rattle-free lockup.
No. Both the recoil lug and mounting screw are captured inside the grip body, so they won't fall out when you take it off the rail.
SKU: 194201161 • Width: 4in • Height: 1.25in • Depth: 3.5in • Weight: 2.5oz