Arisaka Defense115729570
Arisaka Offset Scout Mount M-LOK - Flat Dark Earth (FDE) - Precision Tactical Accessory$50.00
Availability: In Stock
The Arisaka Offset Scout Mount for Galil/MPX M-LOK is a precision mounting solution engineered to position weapon-mounted lights at an optimal angle on two of the most demanding tactical platforms available. This mount is specifically designed for the IWI Galil ACE Gen 2 and SIG MPX M-LOK handguard profiles, using the side-rail mounting surfaces to place your light at a 30-degree offset that naturally complements the gun's geometry while keeping the light tucked tight to the rail system. Whether you're running a short-range carbine for home defense, setting up a dedicated 3-gun competition gun, or configuring a patrol rifle, this mount solves the real-world problem of getting your light in the right place without blocking your optics or front sight.
What sets this mount apart is its flexibility. Three lateral mounting positions let you dial in exactly where the light sits relative to your top rail and other accessories—spanning about a quarter-inch of adjustment. Oriented upside-down on the side rails, your light sits at the 10:30 or 1:30 position, giving you a firing-hand shadow throw and the ergonomic positioning serious shooters expect from a Scout-profile setup. The mount also plays well with Aero Precision Atlas R-One and S-One handguards, adding versatility if you experiment across platforms.
Arisaka Defense engineered this mount to accommodate an extensive range of proven weapon lights: Surefire Scout M-series and M300-series heads, Modlite PLH and OKW, Streamlight Protac Rail Mount models (non-laser), Olight Odin, and Arisaka's own 300, 600, and 18650 Series lights. All hardware—M-LOK nuts and Torx fasteners—is included. Built in the USA with the attention to detail you'd expect from a company that started in the precision optics and mounting space.
| Mount Type | M-LOK Offset Scout |
| Length | 1.265" |
| Weight | 0.4 oz |
| Light Offset Angle | 30 degrees |
| Lateral Adjustment Range | Approximately 0.240" |
| Hardware | Two M-LOK nuts, two 10-24×5/16" Torx button head screws, two 8-32×3/8" Torx flat head screws |
| Country of Origin | USA |
The Arisaka Offset Scout Mount accepts Surefire Scout and M300-series lights (M300A, M300B, M300C, M300V, M312, M322, and variants), Surefire M600-series lights (M600B, M600C, M600P, M600U, M600V, M600DF), Modlite PLH, PLHv2, and OKW, Streamlight Protac Rail Mount models 1, 2, and HL-X (non-laser), Olight Odin, CD REIN, and Arisaka 300, 600, and 18650 Series lights.
Yes. The mount is specifically engineered for the M-LOK handguard profiles on the IWI Galil ACE Gen 2 and SIG Sauer MPX. It mounts to the side rails and positions the light at a 30-degree angle to match the handguard geometry. It also works with Aero Precision Atlas R-One and S-One handguards.
The mount ships with two M-LOK nuts, two 10-24×5/16" Torx button head screws, and two 8-32×3/8" Torx flat head screws. Everything needed for installation is included.
Yes. Three lateral mounting positions allow you to move the light body closer to or farther from the top rail, front sights, and other accessories, spanning approximately 0.240" of adjustment to dial in your preferred setup.
SKU: 121686511 • Width: 4in • Height: 0.3in • Depth: 5in • Weight: 0.06oz
Availability: In Stock
The Arisaka Offset Scout Mount for Galil/MPX M-LOK is a precision mounting solution engineered to position weapon-mounted lights at an optimal angle on two of the most demanding tactical platforms available. This mount is specifically designed for the IWI Galil ACE Gen 2 and SIG MPX M-LOK handguard profiles, using the side-rail mounting surfaces to place your light at a 30-degree offset that naturally complements the gun's geometry while keeping the light tucked tight to the rail system. Whether you're running a short-range carbine for home defense, setting up a dedicated 3-gun competition gun, or configuring a patrol rifle, this mount solves the real-world problem of getting your light in the right place without blocking your optics or front sight.
What sets this mount apart is its flexibility. Three lateral mounting positions let you dial in exactly where the light sits relative to your top rail and other accessories—spanning about a quarter-inch of adjustment. Oriented upside-down on the side rails, your light sits at the 10:30 or 1:30 position, giving you a firing-hand shadow throw and the ergonomic positioning serious shooters expect from a Scout-profile setup. The mount also plays well with Aero Precision Atlas R-One and S-One handguards, adding versatility if you experiment across platforms.
Arisaka Defense engineered this mount to accommodate an extensive range of proven weapon lights: Surefire Scout M-series and M300-series heads, Modlite PLH and OKW, Streamlight Protac Rail Mount models (non-laser), Olight Odin, and Arisaka's own 300, 600, and 18650 Series lights. All hardware—M-LOK nuts and Torx fasteners—is included. Built in the USA with the attention to detail you'd expect from a company that started in the precision optics and mounting space.
| Mount Type | M-LOK Offset Scout |
| Length | 1.265" |
| Weight | 0.4 oz |
| Light Offset Angle | 30 degrees |
| Lateral Adjustment Range | Approximately 0.240" |
| Hardware | Two M-LOK nuts, two 10-24×5/16" Torx button head screws, two 8-32×3/8" Torx flat head screws |
| Country of Origin | USA |
The Arisaka Offset Scout Mount accepts Surefire Scout and M300-series lights (M300A, M300B, M300C, M300V, M312, M322, and variants), Surefire M600-series lights (M600B, M600C, M600P, M600U, M600V, M600DF), Modlite PLH, PLHv2, and OKW, Streamlight Protac Rail Mount models 1, 2, and HL-X (non-laser), Olight Odin, CD REIN, and Arisaka 300, 600, and 18650 Series lights.
Yes. The mount is specifically engineered for the M-LOK handguard profiles on the IWI Galil ACE Gen 2 and SIG Sauer MPX. It mounts to the side rails and positions the light at a 30-degree angle to match the handguard geometry. It also works with Aero Precision Atlas R-One and S-One handguards.
The mount ships with two M-LOK nuts, two 10-24×5/16" Torx button head screws, and two 8-32×3/8" Torx flat head screws. Everything needed for installation is included.
Yes. Three lateral mounting positions allow you to move the light body closer to or farther from the top rail, front sights, and other accessories, spanning approximately 0.240" of adjustment to dial in your preferred setup.
SKU: 121686511 • Width: 4in • Height: 0.3in • Depth: 5in • Weight: 0.06oz