Arisaka Defense197551487
Arisaka Defense Plate #11 Tall Height (1.9''-2.2'') Optic Plate$25.00
Availability: In Stock
Current Stock: Out of stock
The Arisaka Defense Plate #10 Tall Height optic plate is a precision replacement component for the modular Arisaka offset optic mount system. If you're running a tall scope mount (1.9" to 2.2" centerline height) and need to co-witness a red dot sight at 35 or 45 degrees offset, this plate is engineered to mate with specific red dot models while maintaining the system's clean, repeatable geometry. It's CNC machined from 6061-T6 aluminum and hard coat anodized to MIL-A-8625 Type III specs—the same rugged finish as the base, so the whole rig wears together and stays put through recoil and handling.
Tall height plates exist because scope turrets vary. A larger, higher magnification scope often sits taller on the rail, and cramming a red dot close to it creates shadowing, glare, or just clumsy ergonomics. The Plate #10 is designed for specific red dot models—Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, and SIG Romeo Zero—so before you order, confirm your optic is on that list. The modular design means you can buy just the plate as an upgrade if you swap to a different red dot later, or pair it with the base to build the whole mount from scratch.
Installation and adjustments use IP20 and IP27 Torx Plus drivers (included with the base, if you're building the full system). Plates are reversible, so left- and right-side mounting is possible depending on your setup. If you're building a DMR or precision AR with a taller scope and want offset aiming capability without the weight and complexity of a full second upper, this plate bridges that gap cleanly.
| Product | Arisaka Defense Plate #10 Tall Height Optic Plate |
| Scope Mount Height Range | 1.9" to 2.2" |
| Compatible Red Dot Models | Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero |
| Material | 6061-T6 aluminum |
| Finish | MIL-A-8625 Type III hard coat anodize |
| Mounting System | Arisaka offset optic mount (base sold separately) |
Plate #10 is designed for Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, and SIG Romeo Zero. These models are the only ones verified for this tall height plate. If your red dot isn't listed, check the standard height plates (Plate 4 covers the same models at standard height 1.5"–1.8").
Yes. This is a replacement or additional plate only. You need the Arisaka offset mount base (sold separately) to complete the system. The base attaches to your AR's top Picatinny rail and provides the mounting surface for the plate. Torx Plus drivers are included with the base.
The Arisaka system is reversible, so yes—left and right side mounting is supported, depending on how you configure the base and plate together.
The Plate #10 Tall Height is engineered for scope mounts with centerline heights between 1.9" and 2.2". If your scope mount sits at 1.9", this plate should work, but the clearance geometry depends on your specific scope and turret design. If you're just under that range, consider the standard height plates instead.
SKU: 197551517 • Weight: 0.08oz
Availability: In Stock
Current Stock: Out of stock
The Arisaka Defense Plate #10 Tall Height optic plate is a precision replacement component for the modular Arisaka offset optic mount system. If you're running a tall scope mount (1.9" to 2.2" centerline height) and need to co-witness a red dot sight at 35 or 45 degrees offset, this plate is engineered to mate with specific red dot models while maintaining the system's clean, repeatable geometry. It's CNC machined from 6061-T6 aluminum and hard coat anodized to MIL-A-8625 Type III specs—the same rugged finish as the base, so the whole rig wears together and stays put through recoil and handling.
Tall height plates exist because scope turrets vary. A larger, higher magnification scope often sits taller on the rail, and cramming a red dot close to it creates shadowing, glare, or just clumsy ergonomics. The Plate #10 is designed for specific red dot models—Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, and SIG Romeo Zero—so before you order, confirm your optic is on that list. The modular design means you can buy just the plate as an upgrade if you swap to a different red dot later, or pair it with the base to build the whole mount from scratch.
Installation and adjustments use IP20 and IP27 Torx Plus drivers (included with the base, if you're building the full system). Plates are reversible, so left- and right-side mounting is possible depending on your setup. If you're building a DMR or precision AR with a taller scope and want offset aiming capability without the weight and complexity of a full second upper, this plate bridges that gap cleanly.
| Product | Arisaka Defense Plate #10 Tall Height Optic Plate |
| Scope Mount Height Range | 1.9" to 2.2" |
| Compatible Red Dot Models | Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero |
| Material | 6061-T6 aluminum |
| Finish | MIL-A-8625 Type III hard coat anodize |
| Mounting System | Arisaka offset optic mount (base sold separately) |
Plate #10 is designed for Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, and SIG Romeo Zero. These models are the only ones verified for this tall height plate. If your red dot isn't listed, check the standard height plates (Plate 4 covers the same models at standard height 1.5"–1.8").
Yes. This is a replacement or additional plate only. You need the Arisaka offset mount base (sold separately) to complete the system. The base attaches to your AR's top Picatinny rail and provides the mounting surface for the plate. Torx Plus drivers are included with the base.
The Arisaka system is reversible, so yes—left and right side mounting is supported, depending on how you configure the base and plate together.
The Plate #10 Tall Height is engineered for scope mounts with centerline heights between 1.9" and 2.2". If your scope mount sits at 1.9", this plate should work, but the clearance geometry depends on your specific scope and turret design. If you're just under that range, consider the standard height plates instead.
SKU: 197551517 • Weight: 0.08oz