Area 419167529512
Area 419 Zero S-Series 6.5 Cm Sizing Die$275.00
Availability: In Stock
The Area 419 Zero S-Series 22 CM sizing die brings precision reloading engineering into a traditional 7/8" format without premium pricing. Built on the platform that made Area 419's M-Series dies industry-respected, the S-Series delivers full-length neck-to-extractor sizing and controlled shoulder pressure relief in a standard die housing compatible with your existing press setup. This is purpose-built for shooters who demand true sizing geometry and repeatable results without the learning curve of non-traditional systems.
What sets the Zero S-Series apart is the attention to die design fundamentals. The reamer is cut to exact tolerances so your fired cases actually resize properly—no more fighting sticky bolt lift on the second or third firing cycle. The hydraulic shoulder pressure relief system prevents over-sizing, which protects case life and improves consistency. A precision-ground expander mandrel comes installed at .002" neck tension, and the replaceable steel decap pin means you're not buying a whole new die when wear happens. Spring ejection handles spent primers automatically, speeding your workflow at the press.
The die ships with an Area 419 Universal Die Ring, a spare decapping pin, and the tools you need to install and remove the expander mandrel. It's designed to work with standard shellholders from Redding, Hornady, RCBS, and other major manufacturers, or pair it with Area 419's modular shellholder system for added flexibility. Everything is manufactured in the USA.
| Product Type | 7/8" Rifle Sizing Die |
| Caliber | .22 CM |
| Sizing Style | Full-length neck-to-extractor |
| Expander Mandrel Tension | .002" (standard) |
| Material | Steel |
| Country of Origin | USA |
| Included Accessories | Universal die ring, spare decap pin, installation/removal tools |
| Compatible Shellholders | Redding, Hornady, RCBS, and other standard brands; Area 419 modular system |
The Area 419 Zero S-Series is a standard 7/8" die compatible with common shellholders from Redding, Hornady, RCBS, and other major manufacturers. It will work with any press that accepts standard 7/8" dies. If you want maximum flexibility, Area 419 also offers a modular shellholder system that pairs with this die.
The die ships with a .002" neck tension mandrel installed. If you need different tension increments for specific loads or brass conditions, Area 419 offers a mandrel kit with additional sizing options.
The die includes an Area 419 Universal Die Ring, a spare decapping pin, and the necessary tools to install and remove the expander mandrel. Note: shellholder is not included, but the die is compatible with standard brands you may already own.
The hydraulic shoulder pressure relief prevents the die from sizing the shoulder excessively, which protects case longevity and improves shot-to-shot consistency. This design element eliminates the sticky bolt lift problem that can occur with oversized shoulders on subsequent firings.
SKU: 167527944 • Weight: 2oz
Availability: In Stock
The Area 419 Zero S-Series 22 CM sizing die brings precision reloading engineering into a traditional 7/8" format without premium pricing. Built on the platform that made Area 419's M-Series dies industry-respected, the S-Series delivers full-length neck-to-extractor sizing and controlled shoulder pressure relief in a standard die housing compatible with your existing press setup. This is purpose-built for shooters who demand true sizing geometry and repeatable results without the learning curve of non-traditional systems.
What sets the Zero S-Series apart is the attention to die design fundamentals. The reamer is cut to exact tolerances so your fired cases actually resize properly—no more fighting sticky bolt lift on the second or third firing cycle. The hydraulic shoulder pressure relief system prevents over-sizing, which protects case life and improves consistency. A precision-ground expander mandrel comes installed at .002" neck tension, and the replaceable steel decap pin means you're not buying a whole new die when wear happens. Spring ejection handles spent primers automatically, speeding your workflow at the press.
The die ships with an Area 419 Universal Die Ring, a spare decapping pin, and the tools you need to install and remove the expander mandrel. It's designed to work with standard shellholders from Redding, Hornady, RCBS, and other major manufacturers, or pair it with Area 419's modular shellholder system for added flexibility. Everything is manufactured in the USA.
| Product Type | 7/8" Rifle Sizing Die |
| Caliber | .22 CM |
| Sizing Style | Full-length neck-to-extractor |
| Expander Mandrel Tension | .002" (standard) |
| Material | Steel |
| Country of Origin | USA |
| Included Accessories | Universal die ring, spare decap pin, installation/removal tools |
| Compatible Shellholders | Redding, Hornady, RCBS, and other standard brands; Area 419 modular system |
The Area 419 Zero S-Series is a standard 7/8" die compatible with common shellholders from Redding, Hornady, RCBS, and other major manufacturers. It will work with any press that accepts standard 7/8" dies. If you want maximum flexibility, Area 419 also offers a modular shellholder system that pairs with this die.
The die ships with a .002" neck tension mandrel installed. If you need different tension increments for specific loads or brass conditions, Area 419 offers a mandrel kit with additional sizing options.
The die includes an Area 419 Universal Die Ring, a spare decapping pin, and the necessary tools to install and remove the expander mandrel. Note: shellholder is not included, but the die is compatible with standard brands you may already own.
The hydraulic shoulder pressure relief prevents the die from sizing the shoulder excessively, which protects case longevity and improves shot-to-shot consistency. This design element eliminates the sticky bolt lift problem that can occur with oversized shoulders on subsequent firings.
SKU: 167527944 • Weight: 2oz