Area 419167525886
Area 419 Tactical One-Piece Scope Mount 36Mm Diam 32Mm Height 20 Moa$330.00
Availability: In Stock
The Area 419 Tactical One-Piece Scope Mount is a precision rifle optic mount built for shooters who demand rock-solid repeatability. This 36mm diameter mount with 32mm height and 0 MOA configuration integrates your scope and rail into a single rigid unit—no two-piece base, no flex, just direct aluminum-to-steel contact for the kind of consistency long-range hunters and match shooters need. Made in America from 7075 aluminum and CNC-milled to tight tolerances, it's engineered to stay put through recoil and temperature swings.
Area 419 machines each mount's scope contact surfaces in raw aluminum for maximum grip—no coating to compress or wear. Pairs are bored and final-checked as matched sets before leaving the shop, then preserved as individual components to maintain that precision. The design includes separate rail clamping bars that work independently, giving you multiple points of grab on your rifle's Picatinny rail. Inset clamping feet let you adjust where and how the mount grips without losing access to rail real estate for other accessories.
You'll find steel guide pins between the base and the clamp caps to keep everything aligned during assembly and over the life of the mount. Hardware is custom nitrided stainless steel—tough enough to handle field use and tight enough to stay locked. A small Picatinny section on the front cap gives you a platform for minor accessories if needed. This is the kind of mount that rewards quality glass and a solid rifle; it gets out of the way and lets your optic and trigger do their job.
| Mount Type | One-Piece Tactical Mount |
| Scope Tube Diameter | 36mm |
| Mount Height | 32mm |
| Elevation Adjustment | 0 MOA |
| Material | 7075 Aluminum (CNC-milled) |
| Hardware | Custom Nitrided Stainless Steel |
| Alignment Aids | Steel Guide Pins |
| Rail Compatibility | Picatinny |
| Made In | USA |
Yes—this mount is designed for 36mm scope tube diameters. Make sure your scope's objective bell isn't oversized, or it may contact the front cap.
A one-piece design like this eliminates the flex and potential misalignment that can occur where a separate base and ring meet. Everything is milled as one unit, so there's no joint to compress or shift under recoil.
The mount includes nitrided stainless steel hardware. You'll need Picatinny rail fasteners compatible with your rifle's rail, which are not included.
Yes—there's a small Picatinny section on the front cap that will accept small rail-mounted accessories, though your primary scope will occupy most of the mounting platform.
SKU: 167524130 • Width: 6in • Height: 3in • Depth: 10in • Weight: 1.57oz
Availability: In Stock
The Area 419 Tactical One-Piece Scope Mount is a precision rifle optic mount built for shooters who demand rock-solid repeatability. This 36mm diameter mount with 32mm height and 0 MOA configuration integrates your scope and rail into a single rigid unit—no two-piece base, no flex, just direct aluminum-to-steel contact for the kind of consistency long-range hunters and match shooters need. Made in America from 7075 aluminum and CNC-milled to tight tolerances, it's engineered to stay put through recoil and temperature swings.
Area 419 machines each mount's scope contact surfaces in raw aluminum for maximum grip—no coating to compress or wear. Pairs are bored and final-checked as matched sets before leaving the shop, then preserved as individual components to maintain that precision. The design includes separate rail clamping bars that work independently, giving you multiple points of grab on your rifle's Picatinny rail. Inset clamping feet let you adjust where and how the mount grips without losing access to rail real estate for other accessories.
You'll find steel guide pins between the base and the clamp caps to keep everything aligned during assembly and over the life of the mount. Hardware is custom nitrided stainless steel—tough enough to handle field use and tight enough to stay locked. A small Picatinny section on the front cap gives you a platform for minor accessories if needed. This is the kind of mount that rewards quality glass and a solid rifle; it gets out of the way and lets your optic and trigger do their job.
| Mount Type | One-Piece Tactical Mount |
| Scope Tube Diameter | 36mm |
| Mount Height | 32mm |
| Elevation Adjustment | 0 MOA |
| Material | 7075 Aluminum (CNC-milled) |
| Hardware | Custom Nitrided Stainless Steel |
| Alignment Aids | Steel Guide Pins |
| Rail Compatibility | Picatinny |
| Made In | USA |
Yes—this mount is designed for 36mm scope tube diameters. Make sure your scope's objective bell isn't oversized, or it may contact the front cap.
A one-piece design like this eliminates the flex and potential misalignment that can occur where a separate base and ring meet. Everything is milled as one unit, so there's no joint to compress or shift under recoil.
The mount includes nitrided stainless steel hardware. You'll need Picatinny rail fasteners compatible with your rifle's rail, which are not included.
Yes—there's a small Picatinny section on the front cap that will accept small rail-mounted accessories, though your primary scope will occupy most of the mounting platform.
SKU: 167524130 • Width: 6in • Height: 3in • Depth: 10in • Weight: 1.57oz