Area 419167528795
Area 419 Hunt 30Mm Diam Low (24Mm) Scope Rings$190.00
Availability: In Stock
Area 419 Hunt 30mm scope rings are precision-matched optics mounts designed for hunters who refuse to compromise on accuracy or durability. Built from 7075 aerospace-grade billet aluminum, these low-profile rings hold your riflescope rock-solid through the recoil cycles and field conditions that matter. At just 4 ounces per set, they keep your rifle light and handy without sacrificing the rigidity required for consistent, repeatable shooting.
What sets Hunt rings apart is Area 419's final-bore matching process. After machining, caps are torqued to spec over precision spacers, then the entire assembled set is final-bored together on their CNC equipment. This means your rings don't just fit your scope—they're dimensionally true as a matched pair. The raw aluminum internal bore grips your optic with more mechanical consistency than conventional rings, and the Type 3 hardcoat anodize exterior resists wear and corrosion in the field. Stainless steel hardware ensures no frozen screws when temperatures drop.
These rings prioritize weight savings and clean lines. There are no accessory attachment points on the Hunt model—if you need to mount rail systems or accessories directly to your rings, Area 419's Match or Tactical offerings provide that flexibility. For hunters building a lightweight, packable rifle that doesn't sacrifice on optic security, Hunt rings deliver the engineering and reliability you'd expect from a company known for match-grade precision.
| Tube Diameter | 30mm |
| Ring Height | Low |
| Rail Slot Width | 24mm |
| Material | 7075 Aerospace Grade Billet Aluminum |
| Hardware | Stainless Steel |
| Finish | Type 3 Hardcoat Anodize (raw aluminum bore) |
| Weight | 4 oz per set |
Area 419 assembles and torques the caps on both rings, then places the complete set into precision CNC fixtures and bores them together. This ensures the rings are dimensionally true as a pair and hold your optic with repeatable, mechanical consistency. Off-the-shelf rings bored individually can have subtle misalignment that compounds over time and recoil cycles. Matched sets eliminate that variable.
No. Hunt rings have no accessory attachment points to keep weight and profile minimal. If you need to mount accessories directly to your rings, Area 419 offers their Match and Tactical ring lines, which include mounting provisions.
These rings are designed for 30mm-diameter scopes and fit Picatinny or Weaver rails with 24mm slot spacing. Verify your rifle's rail width before ordering. Hunt rings are a universal ring set, compatible with any 30mm optic.
The raw aluminum interior provides a more reliable, mechanically consistent grip on your scope tube than anodized surfaces. The Type 3 hardcoat anodize on the exterior protects the aluminum from corrosion and wear in field conditions. This design gives you the best of both: durability on the outside, precision on the inside where it matters.
SKU: 167529509 • Weight: 0.6oz
Availability: In Stock
Area 419 Hunt 30mm scope rings are precision-matched optics mounts designed for hunters who refuse to compromise on accuracy or durability. Built from 7075 aerospace-grade billet aluminum, these low-profile rings hold your riflescope rock-solid through the recoil cycles and field conditions that matter. At just 4 ounces per set, they keep your rifle light and handy without sacrificing the rigidity required for consistent, repeatable shooting.
What sets Hunt rings apart is Area 419's final-bore matching process. After machining, caps are torqued to spec over precision spacers, then the entire assembled set is final-bored together on their CNC equipment. This means your rings don't just fit your scope—they're dimensionally true as a matched pair. The raw aluminum internal bore grips your optic with more mechanical consistency than conventional rings, and the Type 3 hardcoat anodize exterior resists wear and corrosion in the field. Stainless steel hardware ensures no frozen screws when temperatures drop.
These rings prioritize weight savings and clean lines. There are no accessory attachment points on the Hunt model—if you need to mount rail systems or accessories directly to your rings, Area 419's Match or Tactical offerings provide that flexibility. For hunters building a lightweight, packable rifle that doesn't sacrifice on optic security, Hunt rings deliver the engineering and reliability you'd expect from a company known for match-grade precision.
| Tube Diameter | 30mm |
| Ring Height | Low |
| Rail Slot Width | 24mm |
| Material | 7075 Aerospace Grade Billet Aluminum |
| Hardware | Stainless Steel |
| Finish | Type 3 Hardcoat Anodize (raw aluminum bore) |
| Weight | 4 oz per set |
Area 419 assembles and torques the caps on both rings, then places the complete set into precision CNC fixtures and bores them together. This ensures the rings are dimensionally true as a pair and hold your optic with repeatable, mechanical consistency. Off-the-shelf rings bored individually can have subtle misalignment that compounds over time and recoil cycles. Matched sets eliminate that variable.
No. Hunt rings have no accessory attachment points to keep weight and profile minimal. If you need to mount accessories directly to your rings, Area 419 offers their Match and Tactical ring lines, which include mounting provisions.
These rings are designed for 30mm-diameter scopes and fit Picatinny or Weaver rails with 24mm slot spacing. Verify your rifle's rail width before ordering. Hunt rings are a universal ring set, compatible with any 30mm optic.
The raw aluminum interior provides a more reliable, mechanically consistent grip on your scope tube than anodized surfaces. The Type 3 hardcoat anodize on the exterior protects the aluminum from corrosion and wear in field conditions. This design gives you the best of both: durability on the outside, precision on the inside where it matters.
SKU: 167529509 • Weight: 0.6oz