$100.00
Availability: In Stock
The Area 419 Hellfire Suppressor Mount Adapter for SilencerCo Omega is a Generation 2 mount designed to convert your Hellfire Self-Timing Brake system into a direct-thread suppressor platform. Simply remove your existing Hellfire Brake and install this adapter to use compatible suppressors—including the SilencerCo Omega, Saker, and Harvester—without additional hardware. This is the solution for shooters who want to switch between muzzle brake and suppressor configurations while keeping the same brake-equipped barrel.
Built from aerospace-grade 17-4PH stainless steel and finished with black nitriding, this mount delivers durability and corrosion resistance in a compact footprint. Unlike earlier Generation 1 designs, the Gen 2 mount eliminates the external collar, threads directly into your suppressor, and adds minimal length to your overall system. The design is clean, straightforward, and built to tight tolerances—no manufacturer affiliation claims, just solid engineering that works.
The mount threads into your suppressor's internal bore, then your can threads onto the adapter via left-hand threads for a secure, self-tightening connection as you attach it to the barrel. Area 419 includes a Hellfire wrench with each Gen 2 mount and recommends blue threadlocker on the external threads to keep the adapter seated in the suppressor semi-permanently. If you ever need to separate them, the opposing thread directions mean they'll never seize—reverse direction and they part cleanly every time.
Ideal for precision rifle shooters, hunters, and suppressors users who demand a modular, compact mounting solution, this adapter bridges the gap between brake and can with minimal compromise.
| Brand | Area 419 |
| Mount Type | Suppressor Adapter / Generation 2 |
| Material | 17-4PH Stainless Steel |
| Finish | Black Nitrided |
| Thread Direction | Left-Hand |
| Compatible Suppressors | SilencerCo Omega, Saker, Harvester |
| Included Accessories | Hellfire Wrench |
Yes. Remove your Hellfire Brake, install this adapter, and attach your suppressor. When you're ready to go back to the brake, reverse the process. It's a quick swap that keeps you flexible in the field.
This adapter is designed for SilencerCo Omega, Saker, and Harvester models. If you own a different SilencerCo can, check the internal bore diameter to confirm fit before ordering.
Area 419 recommends applying blue threadlocker to the external threads of the mount where it seats in the suppressor. This holds it semi-permanently in place while remaining removable when needed.
They won't. The opposing left-hand and right-hand thread geometry makes seizing impossible. Simply turn the assembly in the opposite direction and they'll separate cleanly. No risk of galling or freezing.
SKU: 167522323 • Width: 3.4in • Height: 1.75in • Depth: 5.8in • Weight: 0.414oz
Availability: In Stock
The Area 419 Hellfire Suppressor Mount Adapter for SilencerCo Omega is a Generation 2 mount designed to convert your Hellfire Self-Timing Brake system into a direct-thread suppressor platform. Simply remove your existing Hellfire Brake and install this adapter to use compatible suppressors—including the SilencerCo Omega, Saker, and Harvester—without additional hardware. This is the solution for shooters who want to switch between muzzle brake and suppressor configurations while keeping the same brake-equipped barrel.
Built from aerospace-grade 17-4PH stainless steel and finished with black nitriding, this mount delivers durability and corrosion resistance in a compact footprint. Unlike earlier Generation 1 designs, the Gen 2 mount eliminates the external collar, threads directly into your suppressor, and adds minimal length to your overall system. The design is clean, straightforward, and built to tight tolerances—no manufacturer affiliation claims, just solid engineering that works.
The mount threads into your suppressor's internal bore, then your can threads onto the adapter via left-hand threads for a secure, self-tightening connection as you attach it to the barrel. Area 419 includes a Hellfire wrench with each Gen 2 mount and recommends blue threadlocker on the external threads to keep the adapter seated in the suppressor semi-permanently. If you ever need to separate them, the opposing thread directions mean they'll never seize—reverse direction and they part cleanly every time.
Ideal for precision rifle shooters, hunters, and suppressors users who demand a modular, compact mounting solution, this adapter bridges the gap between brake and can with minimal compromise.
| Brand | Area 419 |
| Mount Type | Suppressor Adapter / Generation 2 |
| Material | 17-4PH Stainless Steel |
| Finish | Black Nitrided |
| Thread Direction | Left-Hand |
| Compatible Suppressors | SilencerCo Omega, Saker, Harvester |
| Included Accessories | Hellfire Wrench |
Yes. Remove your Hellfire Brake, install this adapter, and attach your suppressor. When you're ready to go back to the brake, reverse the process. It's a quick swap that keeps you flexible in the field.
This adapter is designed for SilencerCo Omega, Saker, and Harvester models. If you own a different SilencerCo can, check the internal bore diameter to confirm fit before ordering.
Area 419 recommends applying blue threadlocker to the external threads of the mount where it seats in the suppressor. This holds it semi-permanently in place while remaining removable when needed.
They won't. The opposing left-hand and right-hand thread geometry makes seizing impossible. Simply turn the assembly in the opposite direction and they'll separate cleanly. No risk of galling or freezing.
SKU: 167522323 • Width: 3.4in • Height: 1.75in • Depth: 5.8in • Weight: 0.414oz