$350.00
Availability: In Stock
The Area 419 Full Cantilever 1-Piece Scope Mount in 34mm diameter combines precision engineering with practical durability for serious long-range shooters and bolt-action rifle builders. This mid-cantilever design delivers the kind of repeatability and rigidity you need when your shot counts—built from American 7075 aluminum and finished with meticulous attention to detail that separates Area 419 mounts from the crowded field of generic optic bases.
What sets this mount apart is Area 419's insistence on final-boring the rings as complete assembled sets in their own machining centers, rather than assembling pre-anodized parts and calling it done. Raw aluminum contact surfaces grip your scope tube with zero slippage, and the 32mm height with 20 MOA elevation built in suits bolt-action platforms without excessive offset. Steel guide pins keep the base and cap rings perfectly aligned, while separate rail clamping bars maximize purchase on your Picatinny rail. Inset clamping feet give you full adjustment range without eating up your rail real estate.
At roughly 8–9 ounces depending on configuration, the mount balances substance with weight discipline—no unnecessary material, just the robustness a quality optic deserves. Every unit is QC'd as a finished assembly, so you're getting consistency from the moment it ships. If you're building a precision rifle where accuracy and reliability matter more than shaving ounces, this is the foundation your scope should sit on.
| Tube Diameter | 34mm |
| Mount Height | 32mm |
| Elevation | 20 MOA |
| Mount Type | 1-Piece Full Cantilever |
| Cantilever Style | Mid-Cantilever |
| Material | 7075 Aluminum (raw internal surfaces), Nitrided Stainless Hardware |
| Weight | 8–9 ounces |
| Manufacturing | CNC Milled in America, Final-Bored in Sets |
| Rail Type | Picatinny |
Area 419 built this mount as a mid-cantilever for bolt-action platforms where less offset is desired. The 32mm height and 20 MOA elevation work well with modern precision rifle builds and hunting setups that benefit from proper eye relief without excessive forward reach.
Final-boring the assembled mount ensures the rings are perfectly aligned and matched to each other for consistent, repeatable clamping force across your entire scope tube. Area 419 never fully disassembles the mount after boring, which preserves that precision from the machine through final QC to your rifle.
You receive the complete 1-piece mount with integrated base and ring caps, steel guide pins, separate rail clamping bars, and custom nitrided stainless hardware.
The Area 419 34mm Full Cantilever mount weighs approximately 8–9 ounces, depending on configuration.
SKU: 167524128 • Width: 5.75in • Height: 3in • Depth: 9.5in • Weight: 1.595oz
Availability: In Stock
The Area 419 Full Cantilever 1-Piece Scope Mount in 34mm diameter combines precision engineering with practical durability for serious long-range shooters and bolt-action rifle builders. This mid-cantilever design delivers the kind of repeatability and rigidity you need when your shot counts—built from American 7075 aluminum and finished with meticulous attention to detail that separates Area 419 mounts from the crowded field of generic optic bases.
What sets this mount apart is Area 419's insistence on final-boring the rings as complete assembled sets in their own machining centers, rather than assembling pre-anodized parts and calling it done. Raw aluminum contact surfaces grip your scope tube with zero slippage, and the 32mm height with 20 MOA elevation built in suits bolt-action platforms without excessive offset. Steel guide pins keep the base and cap rings perfectly aligned, while separate rail clamping bars maximize purchase on your Picatinny rail. Inset clamping feet give you full adjustment range without eating up your rail real estate.
At roughly 8–9 ounces depending on configuration, the mount balances substance with weight discipline—no unnecessary material, just the robustness a quality optic deserves. Every unit is QC'd as a finished assembly, so you're getting consistency from the moment it ships. If you're building a precision rifle where accuracy and reliability matter more than shaving ounces, this is the foundation your scope should sit on.
| Tube Diameter | 34mm |
| Mount Height | 32mm |
| Elevation | 20 MOA |
| Mount Type | 1-Piece Full Cantilever |
| Cantilever Style | Mid-Cantilever |
| Material | 7075 Aluminum (raw internal surfaces), Nitrided Stainless Hardware |
| Weight | 8–9 ounces |
| Manufacturing | CNC Milled in America, Final-Bored in Sets |
| Rail Type | Picatinny |
Area 419 built this mount as a mid-cantilever for bolt-action platforms where less offset is desired. The 32mm height and 20 MOA elevation work well with modern precision rifle builds and hunting setups that benefit from proper eye relief without excessive forward reach.
Final-boring the assembled mount ensures the rings are perfectly aligned and matched to each other for consistent, repeatable clamping force across your entire scope tube. Area 419 never fully disassembles the mount after boring, which preserves that precision from the machine through final QC to your rifle.
You receive the complete 1-piece mount with integrated base and ring caps, steel guide pins, separate rail clamping bars, and custom nitrided stainless hardware.
The Area 419 34mm Full Cantilever mount weighs approximately 8–9 ounces, depending on configuration.
SKU: 167524128 • Width: 5.75in • Height: 3in • Depth: 9.5in • Weight: 1.595oz