American Defense114461676
American Defense Trijicon MRO LW Quick-Release Co-Witness Mount - Precision Optic Solution for Tactical Excellence$115.28
Availability: In Stock
The American Defense Aimpoint T1 lightweight quick-release mount pairs solid engineering with practical performance for shooters running Aimpoint micro red dots. Built from 6061-T6 aluminum and finished in hard coat mil-spec anodize, this mount strips away unnecessary weight—roughly 20% lighter than traditional designs—without sacrificing strength or zero retention. The slimmer profile also gives you a cleaner sight picture and better situational awareness downrange, which matters whether you're training at distance or moving through timber.
This is a true "grab and go" mount. The patented QD Auto Lock Lever system locks onto standard Picatinny rails with positive engagement, and it's smart enough to handle both in-spec and out-of-spec rail tolerances. No proprietary tools required—finger-tight or a flat-blade screwdriver is all you need to dial it in. The lever can be oriented to lock forward or rearward depending on your build and preference, and the clamping surface is built for maximum contact with your rail so your zero stays put.
Designed specifically for Aimpoint T1 and T2 dots, the mount also works with H1/H2, Sig Romeo 5, and other optics that share the Micro footprint. If you're building a lightweight setup, upgrading from a heavier mount, or just want a mount that stays put without fuss, this is the kind of piece that earns its place on your rifle.
| Brand | American Defense |
| Mount Type | Quick-Release Co-Witness |
| Material | 6061-T6 Aluminum |
| Finish | Hard Coat T3 Mil-Spec Anodize |
| Compatible Optics | Aimpoint T1/T2, H1/H2, Sig Romeo 5, Crossfire, and Micro-footprint red dots |
| Rail Compatibility | Picatinny |
| Weight Reduction | Approximately 20% vs. traditional designs |
The American Defense T1 mount is designed for Aimpoint T1 and T2 dots, and also works with Aimpoint H1/H2, Sig Romeo 5, Crossfire, and any other red dot that uses the Micro footprint. If your optic uses that standard footprint, this mount will work.
No. Installation and adjustment can be done with your finger or a flat-blade screwdriver. There are no proprietary tools required.
Yes. The QD Auto Lock Lever can be configured to lock toward either the front or rear of the rail, so you can orient it to suit your setup and preference.
The patented QD Auto Lock Lever system is designed to accommodate both in-spec and out-of-spec rail tolerances, thanks to its superior clamping surface and positive engagement system.
SKU: 114465060 • Width: 2.25in • Height: 2.25in • Depth: 4.75in • Weight: 0.25oz
Availability: In Stock
The American Defense Aimpoint T1 lightweight quick-release mount pairs solid engineering with practical performance for shooters running Aimpoint micro red dots. Built from 6061-T6 aluminum and finished in hard coat mil-spec anodize, this mount strips away unnecessary weight—roughly 20% lighter than traditional designs—without sacrificing strength or zero retention. The slimmer profile also gives you a cleaner sight picture and better situational awareness downrange, which matters whether you're training at distance or moving through timber.
This is a true "grab and go" mount. The patented QD Auto Lock Lever system locks onto standard Picatinny rails with positive engagement, and it's smart enough to handle both in-spec and out-of-spec rail tolerances. No proprietary tools required—finger-tight or a flat-blade screwdriver is all you need to dial it in. The lever can be oriented to lock forward or rearward depending on your build and preference, and the clamping surface is built for maximum contact with your rail so your zero stays put.
Designed specifically for Aimpoint T1 and T2 dots, the mount also works with H1/H2, Sig Romeo 5, and other optics that share the Micro footprint. If you're building a lightweight setup, upgrading from a heavier mount, or just want a mount that stays put without fuss, this is the kind of piece that earns its place on your rifle.
| Brand | American Defense |
| Mount Type | Quick-Release Co-Witness |
| Material | 6061-T6 Aluminum |
| Finish | Hard Coat T3 Mil-Spec Anodize |
| Compatible Optics | Aimpoint T1/T2, H1/H2, Sig Romeo 5, Crossfire, and Micro-footprint red dots |
| Rail Compatibility | Picatinny |
| Weight Reduction | Approximately 20% vs. traditional designs |
The American Defense T1 mount is designed for Aimpoint T1 and T2 dots, and also works with Aimpoint H1/H2, Sig Romeo 5, Crossfire, and any other red dot that uses the Micro footprint. If your optic uses that standard footprint, this mount will work.
No. Installation and adjustment can be done with your finger or a flat-blade screwdriver. There are no proprietary tools required.
Yes. The QD Auto Lock Lever can be configured to lock toward either the front or rear of the rail, so you can orient it to suit your setup and preference.
The patented QD Auto Lock Lever system is designed to accommodate both in-spec and out-of-spec rail tolerances, thanks to its superior clamping surface and positive engagement system.
SKU: 114465060 • Width: 2.25in • Height: 2.25in • Depth: 4.75in • Weight: 0.25oz