American Defense Manufacturing167529130
American Defense 34Mm 40 Moa Scope Mount Black$256.96
American Defense Manufacturing
Availability: In Stock
The American Defense 34mm 0 MOA scope mount is a quick-release precision optic platform built for shooters who demand both rock-solid lockdown and rapid detach capability. Whether you're running a rifle for hunting, tactical training, or long-range work, this mount delivers the mechanical security needed under heavy recoil while letting you swap or service your scope in seconds.
The lever-lock system is the heart of this mount's design. A dual-lever quick-release mechanism grips your Picatinny or Weaver rail with authority—the harder the recoil impulse, the tighter it holds. Simply depress the release tab and the mount swings free for tool-free removal or reattachment. You can configure the lever to lock forward or rearward, adapting to your rifle's ergonomics and rail layout. Adjustment is straightforward: a flat-head screwdriver or even a coin lets you dial in a secure, slip-free fit across standard, over-sized, or under-sized commercial rails.
Strength comes from intelligent engineering. A large side-mounted locking bar maximizes contact with rail surface area, while a crossbolt and two integral locking lugs prevent any movement during fire. Five heavy-duty steel hex screws—three atop the rings, two beneath—clamp the vertically split ring halves together with authority. Strategic cutouts in the ring sides and base trim weight without compromising rigidity, keeping your rifle balanced without unnecessary bulk.
At 0 MOA (zero-angle configuration), this mount positions your scope at natural height over a flattop receiver rail, simplifying zeroing and offering a clean sight picture without canting. If precision optics are central to your setup, this is the kind of mount that lets you focus on shooting, not worrying about shift or slippage.
| Tube Diameter | 34mm |
| MOA Configuration | 0 MOA |
| Rail Compatibility | Picatinny and Weaver-style |
| Mount Type | Quick-release with lever-lock |
| Color | Black |
| Fastener Material | Steel hex head screws (5 total) |
The American Defense mount works on both Picatinny and Weaver-style rails, including over-sized and under-sized commercial variants. Adjustment via screwdriver or coin ensures a snug, no-slip fit across these different rail specs.
Depress the release tab to swing the lever open; the mount lifts cleanly off the rifle. You can position the lever to lock toward the front or rear of your rifle, letting you set it where it works best for your shooting position and ergonomics.
Yes. The lever-lock system is designed so that recoil force actually increases the clamping pressure, preventing loosening. The large side locking bar, crossbolt, two integral locking lugs, and five steel hex screws work together to lock the rings and base to the rail with absolute security.
0 MOA means the mount is configured at zero angle, positioning your scope at a natural height directly above a flattop receiver rail without any forward or backward tilt. This simplifies zeroing and is the standard setup for many hunting and target rifles.
SKU: 167526499 • Weight: 0.63oz
American Defense Manufacturing
Availability: In Stock
The American Defense 34mm 0 MOA scope mount is a quick-release precision optic platform built for shooters who demand both rock-solid lockdown and rapid detach capability. Whether you're running a rifle for hunting, tactical training, or long-range work, this mount delivers the mechanical security needed under heavy recoil while letting you swap or service your scope in seconds.
The lever-lock system is the heart of this mount's design. A dual-lever quick-release mechanism grips your Picatinny or Weaver rail with authority—the harder the recoil impulse, the tighter it holds. Simply depress the release tab and the mount swings free for tool-free removal or reattachment. You can configure the lever to lock forward or rearward, adapting to your rifle's ergonomics and rail layout. Adjustment is straightforward: a flat-head screwdriver or even a coin lets you dial in a secure, slip-free fit across standard, over-sized, or under-sized commercial rails.
Strength comes from intelligent engineering. A large side-mounted locking bar maximizes contact with rail surface area, while a crossbolt and two integral locking lugs prevent any movement during fire. Five heavy-duty steel hex screws—three atop the rings, two beneath—clamp the vertically split ring halves together with authority. Strategic cutouts in the ring sides and base trim weight without compromising rigidity, keeping your rifle balanced without unnecessary bulk.
At 0 MOA (zero-angle configuration), this mount positions your scope at natural height over a flattop receiver rail, simplifying zeroing and offering a clean sight picture without canting. If precision optics are central to your setup, this is the kind of mount that lets you focus on shooting, not worrying about shift or slippage.
| Tube Diameter | 34mm |
| MOA Configuration | 0 MOA |
| Rail Compatibility | Picatinny and Weaver-style |
| Mount Type | Quick-release with lever-lock |
| Color | Black |
| Fastener Material | Steel hex head screws (5 total) |
The American Defense mount works on both Picatinny and Weaver-style rails, including over-sized and under-sized commercial variants. Adjustment via screwdriver or coin ensures a snug, no-slip fit across these different rail specs.
Depress the release tab to swing the lever open; the mount lifts cleanly off the rifle. You can position the lever to lock toward the front or rear of your rifle, letting you set it where it works best for your shooting position and ergonomics.
Yes. The lever-lock system is designed so that recoil force actually increases the clamping pressure, preventing loosening. The large side locking bar, crossbolt, two integral locking lugs, and five steel hex screws work together to lock the rings and base to the rail with absolute security.
0 MOA means the mount is configured at zero angle, positioning your scope at a natural height directly above a flattop receiver rail without any forward or backward tilt. This simplifies zeroing and is the standard setup for many hunting and target rifles.
SKU: 167526499 • Weight: 0.63oz