Allen Company200188324
Allen Helix Tilt Rifle Bipod Swivel Stud Mount Black$70.13
Availability: In Stock
The Allen Helix Rifle Bipod with Picatinny Rail Mount is a lightweight shooting rest built for hunters, competitive shooters, and precision rifle enthusiasts who need stable platform support without dragging down their setup. This bipod clamps directly to standard Picatinny rails on most modern rifle handguards, giving you a rock-solid anchor point for prone shooting, bench work, or field positions on variable terrain. At just 11.4 ounces and built from aircraft-grade aluminum paired with reinforced polymer, it delivers serious stability without the weight penalty of heavier rests.
Adjustability is where the Helix earns its place in your kit. The bipod extends from 8 to 11 inches tall across four distinct length settings in 1-inch increments, so you can dial in the right height whether you're shooting flat from prone or angling up on a slope. The 180-degree ARC system gives you five leg positions forward and rearward, letting you quickly adapt from a tight low stance to wider angles that handle uneven ground. Leg deployment is fast and intuitive—no fumbling with levers or locks when the shot opportunity is there. The textured silicone grip zone keeps your control firm even with gloves, and the reinforced feet bite into grass, gravel, concrete, or smooth shooting benches without sliding.
This is a no-fuss accessory that does one job well: locks your rifle down and stays locked until you move it. Whether you're zeroing a new scope, working up loads at the range, or hunting from a predetermined setup, the Helix gives you the confidence that recoil and barrel rise aren't throwing off your point of aim between shots.
| Brand | Allen Company |
| Product Name | Helix Rifle Bipod with Picatinny Rail Mount |
| Mount Type | Picatinny Rail |
| Height Range | 8–11 inches |
| Height Adjustments | 4 settings (1-inch increments) |
| Leg Positions | 5 (forward and rearward articulation) |
| Articulation | 180-degree ARC |
| Weight | 11.4 ounces |
| Construction | Aircraft-grade aluminum and reinforced polymer |
| Grip | Textured silicone |
| Feet | Rugged booted design |
The Helix mount clamps to standard Picatinny rails, which are found on most modern rifle handguards. Check that your rifle has a Picatinny-compatible rail on the foregrip or handguard.
The Helix adjusts from 8 to 11 inches tall in four separate 1-inch increments. This range works well for prone shooting, bench-rest positions, and low-angle field setups. For significantly elevated positions or tall benches, you may need a taller rest.
Yes. The 180-degree ARC system and five leg positions let you angle the legs to compensate for slopes and uneven terrain. The booted feet grip grass, gravel, and dirt securely, so you can adapt to the ground rather than being locked into one plane.
The Helix weighs 11.4 ounces, making it a lightweight option for hunters and shooters who don't want to add substantial weight to their rifle.
SKU: 200188331
Availability: In Stock
The Allen Helix Rifle Bipod with Picatinny Rail Mount is a lightweight shooting rest built for hunters, competitive shooters, and precision rifle enthusiasts who need stable platform support without dragging down their setup. This bipod clamps directly to standard Picatinny rails on most modern rifle handguards, giving you a rock-solid anchor point for prone shooting, bench work, or field positions on variable terrain. At just 11.4 ounces and built from aircraft-grade aluminum paired with reinforced polymer, it delivers serious stability without the weight penalty of heavier rests.
Adjustability is where the Helix earns its place in your kit. The bipod extends from 8 to 11 inches tall across four distinct length settings in 1-inch increments, so you can dial in the right height whether you're shooting flat from prone or angling up on a slope. The 180-degree ARC system gives you five leg positions forward and rearward, letting you quickly adapt from a tight low stance to wider angles that handle uneven ground. Leg deployment is fast and intuitive—no fumbling with levers or locks when the shot opportunity is there. The textured silicone grip zone keeps your control firm even with gloves, and the reinforced feet bite into grass, gravel, concrete, or smooth shooting benches without sliding.
This is a no-fuss accessory that does one job well: locks your rifle down and stays locked until you move it. Whether you're zeroing a new scope, working up loads at the range, or hunting from a predetermined setup, the Helix gives you the confidence that recoil and barrel rise aren't throwing off your point of aim between shots.
| Brand | Allen Company |
| Product Name | Helix Rifle Bipod with Picatinny Rail Mount |
| Mount Type | Picatinny Rail |
| Height Range | 8–11 inches |
| Height Adjustments | 4 settings (1-inch increments) |
| Leg Positions | 5 (forward and rearward articulation) |
| Articulation | 180-degree ARC |
| Weight | 11.4 ounces |
| Construction | Aircraft-grade aluminum and reinforced polymer |
| Grip | Textured silicone |
| Feet | Rugged booted design |
The Helix mount clamps to standard Picatinny rails, which are found on most modern rifle handguards. Check that your rifle has a Picatinny-compatible rail on the foregrip or handguard.
The Helix adjusts from 8 to 11 inches tall in four separate 1-inch increments. This range works well for prone shooting, bench-rest positions, and low-angle field setups. For significantly elevated positions or tall benches, you may need a taller rest.
Yes. The 180-degree ARC system and five leg positions let you angle the legs to compensate for slopes and uneven terrain. The booted feet grip grass, gravel, and dirt securely, so you can adapt to the ground rather than being locked into one plane.
The Helix weighs 11.4 ounces, making it a lightweight option for hunters and shooters who don't want to add substantial weight to their rifle.
SKU: 200188331