Aim Sports114465778
Aim Sports Long Riser Mount - 1" High, 1.6" Length - Precision Optics Elevation ML111$9.99
Loading...
Loading...
Loading...
Availability: In Stock
The Aim Sports ML109 High 1.6" Long Riser Mount is a precision scope base designed to elevate your optics for improved sight picture and cheek weld. Built with a 1.6-inch height profile and engineered for 1/4-inch elevation adjustments, this riser mount works as a dedicated accessory for shooters looking to fine-tune their setup without modifying their receiver or replacing their primary base. Whether you're running a standard-height optic over a picatinny rail or need to clear a cowitness for cowitnessless shooting, a quality riser mount is a no-nonsense way to dial in your geometry.
Constructed from black anodized material, the ML109 resists corrosion and blends with most modern rifle platforms. The long profile provides consistent rail contact and stability for everything from range sessions to field use. Aim Sports has built this mount to work as a straightforward accessory component—no special tools or unusual compatibility issues. It's the kind of piece that does one job well and gets out of the way.
If you're building a precision rifle, upgrading a hunting setup, or just need a clean way to adjust your optic height, the ML109 fits into standard picatinny rail systems. Pair it with your favorite scope or red dot and get to shooting.
| Brand | Aim Sports |
| Model | ML109 |
| Height | 1.6 inches |
| Elevation Adjustment | 1/4 inch |
| Finish | Black Anodized |
| Rail Type | Picatinny |
A riser mount elevates your scope or red dot above the rifle's receiver and rail. This improves your cheek weld, increases sight distance, and can help you clear iron sights or other obstructions below your optic. The ML109's 1.6-inch profile is designed to provide meaningful height while maintaining a low-to-mid profile.
The ML109 is compatible with any rifle or platform using a picatinny rail system. If your rifle has a flat-top receiver or accessory rail, this mount will fit. If you have a different rail type (Weaver, KeyMod, or M-LOK), you'll need an appropriate adapter.
The mount allows you to fine-tune optics height in 1/4-inch increments, giving you precision control over your sight picture and cheek weld without adding or removing shims. This is useful for dialing in the exact position that works best for your setup.
No. The ML109 is a mount accessory only. You'll need to supply your own optic (scope, red dot, etc.) and install it onto the riser using the appropriate rings or mount hardware for your optic's footprint.
SKU: 114462402 • Width: 3in • Height: 1in • Depth: 6.4in • Weight: 0.15oz
Availability: In Stock
The Aim Sports ML109 High 1.6" Long Riser Mount is a precision scope base designed to elevate your optics for improved sight picture and cheek weld. Built with a 1.6-inch height profile and engineered for 1/4-inch elevation adjustments, this riser mount works as a dedicated accessory for shooters looking to fine-tune their setup without modifying their receiver or replacing their primary base. Whether you're running a standard-height optic over a picatinny rail or need to clear a cowitness for cowitnessless shooting, a quality riser mount is a no-nonsense way to dial in your geometry.
Constructed from black anodized material, the ML109 resists corrosion and blends with most modern rifle platforms. The long profile provides consistent rail contact and stability for everything from range sessions to field use. Aim Sports has built this mount to work as a straightforward accessory component—no special tools or unusual compatibility issues. It's the kind of piece that does one job well and gets out of the way.
If you're building a precision rifle, upgrading a hunting setup, or just need a clean way to adjust your optic height, the ML109 fits into standard picatinny rail systems. Pair it with your favorite scope or red dot and get to shooting.
| Brand | Aim Sports |
| Model | ML109 |
| Height | 1.6 inches |
| Elevation Adjustment | 1/4 inch |
| Finish | Black Anodized |
| Rail Type | Picatinny |
A riser mount elevates your scope or red dot above the rifle's receiver and rail. This improves your cheek weld, increases sight distance, and can help you clear iron sights or other obstructions below your optic. The ML109's 1.6-inch profile is designed to provide meaningful height while maintaining a low-to-mid profile.
The ML109 is compatible with any rifle or platform using a picatinny rail system. If your rifle has a flat-top receiver or accessory rail, this mount will fit. If you have a different rail type (Weaver, KeyMod, or M-LOK), you'll need an appropriate adapter.
The mount allows you to fine-tune optics height in 1/4-inch increments, giving you precision control over your sight picture and cheek weld without adding or removing shims. This is useful for dialing in the exact position that works best for your setup.
No. The ML109 is a mount accessory only. You'll need to supply your own optic (scope, red dot, etc.) and install it onto the riser using the appropriate rings or mount hardware for your optic's footprint.
SKU: 114462402 • Width: 3in • Height: 1in • Depth: 6.4in • Weight: 0.15oz