San Tan Tactical167516401
Santan Ar15 Enhncd Bcg 556 Ntrd Blk$182.85
Availability: In Stock
Current Stock: Out of stock
Building a reliable 6.5 Grendel or 6mm ARC rifle starts with a quality bolt carrier group, and the Aero Precision AR15 6.5 Grendel BCG with 9310 steel delivers the precision engineering your mid-range cartridge build deserves. This bolt carrier group is engineered specifically for the demands of precision rifle shooting, whether you're setting up a long-range hunting rig, a match rifle, or a dedicated target platform. Aero Precision's reputation for tight tolerances and attention to detail shows in every machined surface.
The heart of this BCG is dual-material construction: the carrier is machined from 8620 tool steel while the bolt itself is forged from 9310 steel, a combination proven for durability and reliability under pressure. The M16-cut carrier accepts standard mil-spec components and maintains full compatibility with your lower receiver. Every critical surface has been shot peened to relieve stress and extend fatigue life, while HPT (high-pressure test) and MPI (magnetic particle inspection) marks confirm each unit met quality control standards before it left the factory.
The black nitride finish is the real operational advantage here. This advanced coating dramatically reduces friction throughout the operating cycle, which means less fouling buildup, fewer cleaning sessions, and reliable function even when you're running light on lubrication. Forward assist serrations are machined into the carrier for positive control, and the gas key is properly staked to stay put under thousands of firing cycles. The extractor features a high-quality o-ring insert for consistent round grip and reliable feeding cycle after cycle.
If you're assembling a 6.5 Grendel or 6mm ARC upper from scratch or upgrading an existing build with a proven, no-nonsense bolt carrier group, Aero's engineering and finish quality will serve you well on the range or in the field.
| Brand | Aero Precision |
| Caliber Compatibility | 6.5 Grendel, 6mm ARC |
| Carrier Material | 8620 Tool Steel |
| Bolt Material | 9310 Steel |
| Bolt Face Type | Type 2 (.136) |
| Finish | Black Nitride |
| Carrier Style | M16-cut |
| Testing | HPT tested, MPI marked |
Yes. The Aero Precision 6.5 Grendel BCG is purpose-built for both 6.5 Grendel and 6mm ARC uppers. The Type 2 bolt face (.136) and proper gas key design are matched to these cartridges' chamber and pressure profiles.
Black nitride is an advanced surface treatment that creates a harder, lower-friction coating compared to traditional parkerize. This reduces fouling accumulation, minimizes the need for frequent lubrication, and requires less maintenance overall—especially valuable for long shooting sessions or field use.
Yes. The M16-cut carrier is fully compatible with standard mil-spec AR15 lowers and uppers. It will work with any properly dimensioned 6.5 Grendel or 6mm ARC upper receiver.
HPT (high-pressure test) and MPI (magnetic particle inspection) are factory quality-control measures. Each BCG was pressure-tested and magnetically inspected to detect any material defects or stress fractures before shipment, ensuring reliability in the field.
SKU: 126512368 • Weight: 0.88oz
Availability: In Stock
Current Stock: Out of stock
Building a reliable 6.5 Grendel or 6mm ARC rifle starts with a quality bolt carrier group, and the Aero Precision AR15 6.5 Grendel BCG with 9310 steel delivers the precision engineering your mid-range cartridge build deserves. This bolt carrier group is engineered specifically for the demands of precision rifle shooting, whether you're setting up a long-range hunting rig, a match rifle, or a dedicated target platform. Aero Precision's reputation for tight tolerances and attention to detail shows in every machined surface.
The heart of this BCG is dual-material construction: the carrier is machined from 8620 tool steel while the bolt itself is forged from 9310 steel, a combination proven for durability and reliability under pressure. The M16-cut carrier accepts standard mil-spec components and maintains full compatibility with your lower receiver. Every critical surface has been shot peened to relieve stress and extend fatigue life, while HPT (high-pressure test) and MPI (magnetic particle inspection) marks confirm each unit met quality control standards before it left the factory.
The black nitride finish is the real operational advantage here. This advanced coating dramatically reduces friction throughout the operating cycle, which means less fouling buildup, fewer cleaning sessions, and reliable function even when you're running light on lubrication. Forward assist serrations are machined into the carrier for positive control, and the gas key is properly staked to stay put under thousands of firing cycles. The extractor features a high-quality o-ring insert for consistent round grip and reliable feeding cycle after cycle.
If you're assembling a 6.5 Grendel or 6mm ARC upper from scratch or upgrading an existing build with a proven, no-nonsense bolt carrier group, Aero's engineering and finish quality will serve you well on the range or in the field.
| Brand | Aero Precision |
| Caliber Compatibility | 6.5 Grendel, 6mm ARC |
| Carrier Material | 8620 Tool Steel |
| Bolt Material | 9310 Steel |
| Bolt Face Type | Type 2 (.136) |
| Finish | Black Nitride |
| Carrier Style | M16-cut |
| Testing | HPT tested, MPI marked |
Yes. The Aero Precision 6.5 Grendel BCG is purpose-built for both 6.5 Grendel and 6mm ARC uppers. The Type 2 bolt face (.136) and proper gas key design are matched to these cartridges' chamber and pressure profiles.
Black nitride is an advanced surface treatment that creates a harder, lower-friction coating compared to traditional parkerize. This reduces fouling accumulation, minimizes the need for frequent lubrication, and requires less maintenance overall—especially valuable for long shooting sessions or field use.
Yes. The M16-cut carrier is fully compatible with standard mil-spec AR15 lowers and uppers. It will work with any properly dimensioned 6.5 Grendel or 6mm ARC upper receiver.
HPT (high-pressure test) and MPI (magnetic particle inspection) are factory quality-control measures. Each BCG was pressure-tested and magnetically inspected to detect any material defects or stress fractures before shipment, ensuring reliability in the field.
SKU: 126512368 • Weight: 0.88oz