AeroPrecision144599273
Aero 12.7 Mod 4 Handguard Odg$259.99
Availability: In Stock
Current Stock: Out of stock
The Aero Precision 13.5 MOD 4 handguard in Odg is a precision-engineered rail system built for shooters who demand rock-solid stability and clean ergonomics on their AR-15. Machined from 6061-T6 aluminum, this 13.5-inch handguard prioritizes stiffness to minimize deflection under load—critical if you're running optics, lasers, or other mounted accessories that need to stay put. The steel barrel nut locks everything down without requiring any timing, and its mil-spec lug pattern means you won't need specialty tools for installation.
What sets the MOD 4 apart is attention to detail that shooters actually notice. The full-length 7-sided M-LOK interface gives you flexibility to build your setup exactly how you want it, whether that's minimalist or heavily accessorized. Four steel-reinforced QD sockets mean your sling attachment points won't wear out prematurely with standard steel QD mounts. Two anti-rotation set screws keep everything snug and ensure compatibility even with third-party upper receivers. At 16.75 oz, the 13.5-inch length hits a practical middle ground for most modern AR builds—long enough for proper hand placement and rail real estate, short enough to keep weight in check.
Installation is straightforward: drop the handguard on your upper, slide the barrel nut home, torque it down to spec, and lock in the set screws. The MOD 4 plays particularly well with Aero's M4E1 Threaded Upper Receivers and PRO series components, but it's also compatible with standard mil-spec AR-15 uppers. If you're building or upgrading a rifle that needs a no-compromise rail, this is solid engineering backed by Aero's reputation.
| Platform | AR-15 |
| Series | MOD 4 |
| Length | 13.5 inches |
| Material | 6061-T6 aluminum |
| Weight | 16.75 oz |
| Attachment Type | M-LOK |
| Internal Diameter | 1.2 inches |
| Barrel Nut Torque Spec | 55 ± 5 in-lbs |
| What's Included | MOD 4 Handguard, MOD 4 Barrel Nut, Mounting Hardware |
Yes. The MOD 4 is designed to work seamlessly with Aero's M4E1 Threaded Upper Receivers and PRO series components, and it's also fully compatible with any mil-spec AR-15 upper receiver. The steel barrel nut uses a standard mil-spec lug pattern, so no specialty tools are required.
You get the 13.5-inch MOD 4 handguard, the MOD 4 barrel nut, and the mounting hardware needed for installation. You'll just need a standard wrench and an appropriately sized Allen key to complete the install.
Yes. The MOD 4 is specifically engineered to be compatible with low-profile gas blocks, so you can run a clean, slimline setup without clearance issues.
No. One of the MOD 4's design improvements is that timing has been eliminated. The barrel nut installs directly without the additional step, which simplifies installation considerably.
SKU: 144599252 • Weight: 1oz
Availability: In Stock
Current Stock: Out of stock
The Aero Precision 13.5 MOD 4 handguard in Odg is a precision-engineered rail system built for shooters who demand rock-solid stability and clean ergonomics on their AR-15. Machined from 6061-T6 aluminum, this 13.5-inch handguard prioritizes stiffness to minimize deflection under load—critical if you're running optics, lasers, or other mounted accessories that need to stay put. The steel barrel nut locks everything down without requiring any timing, and its mil-spec lug pattern means you won't need specialty tools for installation.
What sets the MOD 4 apart is attention to detail that shooters actually notice. The full-length 7-sided M-LOK interface gives you flexibility to build your setup exactly how you want it, whether that's minimalist or heavily accessorized. Four steel-reinforced QD sockets mean your sling attachment points won't wear out prematurely with standard steel QD mounts. Two anti-rotation set screws keep everything snug and ensure compatibility even with third-party upper receivers. At 16.75 oz, the 13.5-inch length hits a practical middle ground for most modern AR builds—long enough for proper hand placement and rail real estate, short enough to keep weight in check.
Installation is straightforward: drop the handguard on your upper, slide the barrel nut home, torque it down to spec, and lock in the set screws. The MOD 4 plays particularly well with Aero's M4E1 Threaded Upper Receivers and PRO series components, but it's also compatible with standard mil-spec AR-15 uppers. If you're building or upgrading a rifle that needs a no-compromise rail, this is solid engineering backed by Aero's reputation.
| Platform | AR-15 |
| Series | MOD 4 |
| Length | 13.5 inches |
| Material | 6061-T6 aluminum |
| Weight | 16.75 oz |
| Attachment Type | M-LOK |
| Internal Diameter | 1.2 inches |
| Barrel Nut Torque Spec | 55 ± 5 in-lbs |
| What's Included | MOD 4 Handguard, MOD 4 Barrel Nut, Mounting Hardware |
Yes. The MOD 4 is designed to work seamlessly with Aero's M4E1 Threaded Upper Receivers and PRO series components, and it's also fully compatible with any mil-spec AR-15 upper receiver. The steel barrel nut uses a standard mil-spec lug pattern, so no specialty tools are required.
You get the 13.5-inch MOD 4 handguard, the MOD 4 barrel nut, and the mounting hardware needed for installation. You'll just need a standard wrench and an appropriately sized Allen key to complete the install.
Yes. The MOD 4 is specifically engineered to be compatible with low-profile gas blocks, so you can run a clean, slimline setup without clearance issues.
No. One of the MOD 4's design improvements is that timing has been eliminated. The barrel nut installs directly without the additional step, which simplifies installation considerably.
SKU: 144599252 • Weight: 1oz