Accu-Tac115717343
Accu-Tac FC-G2 Bipod | 5.25"-8.25" Adjustable, Black Hardcoat Anodized 6061-T6 Aluminum$494.00
Availability: In Stock
The Accu-Tac HD-50 bipod is purpose-built for shooters running .50 BMG platforms and heavy extreme long-range rifles that demand serious support. This is Accu-Tac's most robust and heavy-duty offering—engineered from the ground up to absorb the brutal recoil signature of a half-inch magnum while keeping your rifle stable and ready to shoot. If you're pushing a large-frame bolt gun or semi-auto chambered in .50 BMG, or running a comparably heavy precision rifle, the HD-50 is the bipod that won't flinch when you squeeze the trigger.
The design philosophy is straightforward: more steel where it counts. Larger arm lock lugs are built to withstand punishment without play or flex. The wide center hub distributes recoil loads and rifle weight across a broader footprint, translating to less wobble and more confidence in your setup. The throw lever isn't just there to adjust leg height—it's your control center, letting you fine-tune tension, lock in canting motion, and dial in exactly how much give you want before the legs stop. That's the kind of tunable feedback serious shooters appreciate.
Flexibility matters on the line. The HD-50 gives you nine different height settings between 7 and 10 inches, covering most bench and supported shooting positions. The legs pivot forward into a stowable angle for transport or seat use, or lock straight down at 90 degrees for rock-solid ground contact. Built from 6061 T6 aluminum with hardened steel hardware and finished in mil-spec hard anodize, this bipod handles field conditions without corrosion or coating failure. At 27.5 ounces, it's hefty enough to stay put—not light, but that weight is structural integrity.
The HD-50 mounts directly to any standard Picatinny rail, making it compatible with most modern rifle platforms in the .50 BMG or heavy ELR space.
| Mount Type | Picatinny Compatible |
| Material | 6061 T6 Aluminum Alloy with high-strength steel hardware |
| Minimum Height | 7" (177.8 mm) |
| Maximum Height | 10" (254 mm) |
| Maximum Stance (Legs at 90°) | 17.5" (444.5 mm) |
| Minimum Stance (Legs at 90°) | 13.5" (342.9 mm) |
| Closed Position Width | 5.5" (139.7 mm) |
| Closed Position Length | 9" (228 mm) |
| Weight | 27.5 oz |
| Color | Flat Black |
| Finish | Type 111 MIL-SPEC Hard Anodize |
Yes, the HD-50 is purpose-designed for .50 BMG platforms and other heavy, high-recoil rifles. It mounts to any standard Picatinny rail, which is standard on modern .50 BMG rifles. The larger arm lock lugs and robust construction are specifically engineered to handle the intense recoil of a .50 BMG.
The HD-50 adjusts between 7 inches minimum height and 10 inches maximum height, with nine distinct settings in between. This range covers typical benchrest, field rest, and supported shooting positions for most rifle setups.
Yes. The throw lever allows you to adjust the tension on the canting motion and lock it precisely where you want it. You can fine-tune how much resistance the legs have before they stop, giving you control over how the bipod responds to small adjustments during a shot sequence.
The legs pivot forward into a stowable angle for transport or when shooting from an elevated position like a bench or vehicle. They also lock straight down at 90 degrees for ground shooting. In the closed position, the bipod measures 9 inches long and 5.5 inches wide, compact enough for most gun cases and hunting packs.
SKU: 115672071 • Width: 10.4in • Height: 5.3in • Depth: 13.5in • Weight: 2.88oz
Availability: In Stock
The Accu-Tac HD-50 bipod is purpose-built for shooters running .50 BMG platforms and heavy extreme long-range rifles that demand serious support. This is Accu-Tac's most robust and heavy-duty offering—engineered from the ground up to absorb the brutal recoil signature of a half-inch magnum while keeping your rifle stable and ready to shoot. If you're pushing a large-frame bolt gun or semi-auto chambered in .50 BMG, or running a comparably heavy precision rifle, the HD-50 is the bipod that won't flinch when you squeeze the trigger.
The design philosophy is straightforward: more steel where it counts. Larger arm lock lugs are built to withstand punishment without play or flex. The wide center hub distributes recoil loads and rifle weight across a broader footprint, translating to less wobble and more confidence in your setup. The throw lever isn't just there to adjust leg height—it's your control center, letting you fine-tune tension, lock in canting motion, and dial in exactly how much give you want before the legs stop. That's the kind of tunable feedback serious shooters appreciate.
Flexibility matters on the line. The HD-50 gives you nine different height settings between 7 and 10 inches, covering most bench and supported shooting positions. The legs pivot forward into a stowable angle for transport or seat use, or lock straight down at 90 degrees for rock-solid ground contact. Built from 6061 T6 aluminum with hardened steel hardware and finished in mil-spec hard anodize, this bipod handles field conditions without corrosion or coating failure. At 27.5 ounces, it's hefty enough to stay put—not light, but that weight is structural integrity.
The HD-50 mounts directly to any standard Picatinny rail, making it compatible with most modern rifle platforms in the .50 BMG or heavy ELR space.
| Mount Type | Picatinny Compatible |
| Material | 6061 T6 Aluminum Alloy with high-strength steel hardware |
| Minimum Height | 7" (177.8 mm) |
| Maximum Height | 10" (254 mm) |
| Maximum Stance (Legs at 90°) | 17.5" (444.5 mm) |
| Minimum Stance (Legs at 90°) | 13.5" (342.9 mm) |
| Closed Position Width | 5.5" (139.7 mm) |
| Closed Position Length | 9" (228 mm) |
| Weight | 27.5 oz |
| Color | Flat Black |
| Finish | Type 111 MIL-SPEC Hard Anodize |
Yes, the HD-50 is purpose-designed for .50 BMG platforms and other heavy, high-recoil rifles. It mounts to any standard Picatinny rail, which is standard on modern .50 BMG rifles. The larger arm lock lugs and robust construction are specifically engineered to handle the intense recoil of a .50 BMG.
The HD-50 adjusts between 7 inches minimum height and 10 inches maximum height, with nine distinct settings in between. This range covers typical benchrest, field rest, and supported shooting positions for most rifle setups.
Yes. The throw lever allows you to adjust the tension on the canting motion and lock it precisely where you want it. You can fine-tune how much resistance the legs have before they stop, giving you control over how the bipod responds to small adjustments during a shot sequence.
The legs pivot forward into a stowable angle for transport or when shooting from an elevated position like a bench or vehicle. They also lock straight down at 90 degrees for ground shooting. In the closed position, the bipod measures 9 inches long and 5.5 inches wide, compact enough for most gun cases and hunting packs.
SKU: 115672071 • Width: 10.4in • Height: 5.3in • Depth: 13.5in • Weight: 2.88oz