Ballistic Advantage167529379
6.5 Grendel 16'' 1-8 Twist Spr Fluted Midlength Bbl W/Lo Pro$232.75
Availability: In Stock
Current Stock: Out of stock
The Ballistic Advantage 6.5 Grendel 12.5'' 1-8 Twist Hanson Carbine Barrel with Lo-Pro Gas Block is built for shooters who demand a lightweight, accurate platform without the weight penalty. Machined from 416R stainless steel and finished with a bead blast, this barrel handles the moderate recoil impulse of the 6.5 Grendel cartridge while maintaining the rigidity needed for consistent hits downrange. The Hanson profile—Ballistic Advantage's proprietary design—delivers the weight savings you want in a short-barreled setup while keeping the accuracy you need for hunting or precision rifle applications.
This barrel comes configured with a pinned low-profile gas block, eliminating one more sourcing decision and ensuring reliable function out of the box. The 1-in-8 twist rate is the right call for the 6.5 Grendel, stabilizing the wide range of bullet weights commonly loaded in this cartridge. At 12.5 inches, you're looking at a true short-barrel build—ideal for close-range hunting, truck guns, or any setup where maneuverability matters more than velocity. The bead-blasted finish provides a clean aesthetic while resisting corrosion.
Worth noting: this barrel is engineered around Ballistic Advantage's direct impingement design philosophy and is not compatible with aftermarket piston conversion kits. If your build plan relies on a piston system, you'll need a different barrel. For hunters and shooters committed to a gas-tube platform, however, the Hanson profile delivers a balance of weight reduction and structural integrity that keeps groups tight.
| Caliber | 6.5 Grendel |
| Barrel Length | 12.5 inches |
| Twist Rate | 1 in 8 |
| Material | 416R Stainless Steel |
| Finish | Bead Blasted |
| Profile | Hanson |
| Gas Block | Pinned Low-Profile (included) |
| Barrel Type | Carbine (continuous profile) |
No. The Hanson series is designed around direct impingement systems and is not compatible with aftermarket piston conversion kits. If you're planning a piston build, you'll need to choose a different barrel.
The barrel ships with a pinned low-profile gas block already installed, so you don't need to source and fit that component separately.
Yes. The 1-in-8 twist is the standard rate for the 6.5 Grendel and will stabilize bullets across the typical range of projectile weights used in this cartridge.
The 12.5'' carbine length and lightweight Hanson profile make this barrel ideal for close-range hunting, truck-gun builds, and any platform where maneuverability and compact handling are priorities. It's also a solid choice for precision rifle shooters who value reduced weight without sacrificing accuracy.
SKU: 167526927 • Weight: 3oz
Availability: In Stock
Current Stock: Out of stock
The Ballistic Advantage 6.5 Grendel 12.5'' 1-8 Twist Hanson Carbine Barrel with Lo-Pro Gas Block is built for shooters who demand a lightweight, accurate platform without the weight penalty. Machined from 416R stainless steel and finished with a bead blast, this barrel handles the moderate recoil impulse of the 6.5 Grendel cartridge while maintaining the rigidity needed for consistent hits downrange. The Hanson profile—Ballistic Advantage's proprietary design—delivers the weight savings you want in a short-barreled setup while keeping the accuracy you need for hunting or precision rifle applications.
This barrel comes configured with a pinned low-profile gas block, eliminating one more sourcing decision and ensuring reliable function out of the box. The 1-in-8 twist rate is the right call for the 6.5 Grendel, stabilizing the wide range of bullet weights commonly loaded in this cartridge. At 12.5 inches, you're looking at a true short-barrel build—ideal for close-range hunting, truck guns, or any setup where maneuverability matters more than velocity. The bead-blasted finish provides a clean aesthetic while resisting corrosion.
Worth noting: this barrel is engineered around Ballistic Advantage's direct impingement design philosophy and is not compatible with aftermarket piston conversion kits. If your build plan relies on a piston system, you'll need a different barrel. For hunters and shooters committed to a gas-tube platform, however, the Hanson profile delivers a balance of weight reduction and structural integrity that keeps groups tight.
| Caliber | 6.5 Grendel |
| Barrel Length | 12.5 inches |
| Twist Rate | 1 in 8 |
| Material | 416R Stainless Steel |
| Finish | Bead Blasted |
| Profile | Hanson |
| Gas Block | Pinned Low-Profile (included) |
| Barrel Type | Carbine (continuous profile) |
No. The Hanson series is designed around direct impingement systems and is not compatible with aftermarket piston conversion kits. If you're planning a piston build, you'll need to choose a different barrel.
The barrel ships with a pinned low-profile gas block already installed, so you don't need to source and fit that component separately.
Yes. The 1-in-8 twist is the standard rate for the 6.5 Grendel and will stabilize bullets across the typical range of projectile weights used in this cartridge.
The 12.5'' carbine length and lightweight Hanson profile make this barrel ideal for close-range hunting, truck-gun builds, and any platform where maneuverability and compact handling are priorities. It's also a solid choice for precision rifle shooters who value reduced weight without sacrificing accuracy.
SKU: 167526927 • Weight: 3oz